Question about 2011 Ultra Ground Pounder ST

1 Answer

Replace the rear drive belt 1999 Ultra Ground Pounder ST

HOW DO I CHANGE REAR DRIVE BELT ON MY HARD TAIL ULTRA GROUND POUNDER I CANT GET THE PRIMARY GEARS OFF TO GET INNER PRIMARY HOUSING OFF TO ACCESS THE DRIVE GEAR IS THAT A NUT IN MIDDLE OR PRESS SLEEVE I REMOVED CLUTCH COVER AND UNSCREWED SHAFT NUT N TAPPED ON SHAFT THOUGHT MAYBE BUT IM LOST ITS A 99 ULTRA GROUND POUNDER RIGID FRAME WITH 113 SS AND 5SPD TRANNY ANY1 CAN HELP ID REALLY APPRECIATE IT THANX LUGNUT @

Posted by lugnuttsplac on

Ad

1 Answer

Gregg Mahin

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Ultra Master
  • 63,338 Answers

Hi, Lugnuttsplac for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Ultra, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at [email protected] Good luck and have a wonderful day.
How To Remove Replace Final Belt Drive on Harley Davidson Motorcycle Biker...
99 to 05 Harley Softail Service Manual pdf
https://www.sscycle.com/
https://ownersmanuals2.com/harley-davidson/softail-deuce-2005-owners-manual-66406
Instant Repair Help over the Phone To speak to me personally $6

Posted on Jun 01, 2019

Ad

5 Related Answers

just-ice

  • 75 Answers

SOURCE: Seagate ultra u320 scsi drive

SCSI is a class of knowledge on its own - drive numbering etc etc - Have you set up the drive cable with the termination block at the end ??.
There are plenty of recovery programs around ( if you have a failing drive or deleted filed etc) but first you have to get the drive 'recognised' by the system.

Try also to Google on "SCSI setup" solutions and try www.youtube.com also. There maybe a video on how to set the drive up, there.

Posted on Feb 02, 2009

Ad
Luisjhernand

Luis Hernandez

  • 84 Answers

SOURCE: How do I power a SATA DVD drive?

There are actually adapters for SATA powered devices as long as you have the required SATA data cable connection to your motherboard.
Click here to see an example of this item from ebay.
All you would have to do is plug in the adapter into any free connection on your existing power supply and then plug in the SATA data cable both into your drive and the motherboard. There are actually SATA data cable adapters if you don't have that either, but i'll just stick to answering your question! (:

ASpecialty4You.com

Posted on Dec 21, 2009

Testimonial: "Thank You, the manual for the PS doesn't explain this. Tom"

Sam

  • 3247 Answers

SOURCE: I have an ultra mini

CAn you please confirm if you are using this device (click link)
What is the Windows operating system and the interface you are using?
What type of hard disk is installed in it?

Posted on Oct 08, 2010

Mithilesh Kumar

  • 138 Answers

SOURCE: Unable to access my folders and files from WG passport ultra external drive. How to fix it?

The following steps may help you:
Start>type control folders>under view tab> tick on "Show hidden files, folders or drives" and at the same time remove tick from "Hide protected operating system files"

Posted on Mar 27, 2015

bremag885

Brenda Magallanes

  • 41 Answers

SOURCE: WD External Hard Drive Passport Ultra Beginner's Questions

Usually with an external hard drive it's not necessary for it to copy over an existing backup or at least you can program your PC not to do this. What will happen is you will have several different copies of backup's and you will have to decide if you want to erase the others and keep the most resent one. Yes your file will be saved withing the backup but if you change the file name it will file this as a new file

Posted on Sep 28, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2014 Harley Davidson Trike Tri Glide Ultra adjust the rear drive belt


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere $38 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at [email protected] Good luck and have a wonderful day.
Thread Drive Belt Tension
Harley Davidson service manual Mark workshop $9 cheap
https://www.motorcycle-manual-download.com/index.php?main_page=product_free_shipping_info&products_id=375 $29
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
2014 Harley Davidson Electra Glide Ultra Classic Owner Manual
2014 Harley Davidson Tri Glide Ultra Owner Manual
Instant Tech Relief To speak to me personally absolutely "FREE"

Feb 25, 2015 | 2014 Harley Davidson Trike Tri Glide Ultra

1 Answer

How do i replace drive belts


you have to unbolt axle to get enough room to put belt on and it will be hard to get belt on best way get rear wills off ground and slip belt on one side of pulley the roll the belt on by rotating rear wheel that are off the ground both wheels have to be off the ground

Aug 08, 2014 | Mtd Garden

2 Answers

Drive belt installation 2000 electreaglid classic


Remove the rear wheel and then remove the primary chain, the clutch, the engine compensating sprocket, and the chain adjuster as an assembly and then remove the primary chaincase housing. Support the bike under the rear fork and engine and then remove the pivot shaft and the spacer THEN slip the belt off the transmission sprocket and then install a new drive belt over the transmission sprocket and proceed to reinstall the pivot shaft and spacer after which you can remove the support holding the engine and rear fork and install the primary chaincase housing, the primary chain assembly and the primary chaincase cover and fill the primary chaincase with lubricant up to the bottom of the clutch diaphragm spring. Install the rear wheel and adjust the belt to the proper deflection dimension and confirm that the rear wheel is properly aligned side to side.

Jul 08, 2014 | 2005 Harley Davidson FLHTCUI Electra Glide...

1 Answer

2000 ultra fat pounder no ignition lights


What lights, speedo illumination and engine light or headlights, running lights etc??? have you checked fuses???

May 04, 2014 | 2000 Harley Davidson FLHTCUI Electra Glide...

1 Answer

Replace drive belt on a flhtk


Hi Anonymous, this is not something you want to try at home on your garage floor. But here is the short version: remove saddle bags, rear wheel, rear shocks, swing arm, outer primary, primary drive, starter, inner primary. Then there the special tools, vehicle alignment, gaskets and seals, ect. ect. ect. Your better off having a professional technician do it. Good luck

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Apr 22, 2014 | 2011 Harley Davidson FLHTK Electra Glide...

1 Answer

HOW DO I ADJUST MY REAR BELT TENSION ON MY 2003 HARLEY ELECTRA GLIDE


Hi Anonymous, for more information about your question please visit the website below. Good luck and have nice day.
Motorcycle Repair Inspecting Adjusting the Final Drive Belt on 2008 Harley...

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Oct 01, 2012 | 2003 Harley Davidson FLHTCUI Electra Glide...

1 Answer

I have a Heritage Softail 87 on my way home I lost all gears, clutch feels fine, and I can feel it select gears but still no engagement of the gears, the bike also runs fine but no neutral light. Cheers...


Put the bike in gear with the engine not running. Try to push the bike. If the bike rolls freely, the final drive belt is broken. Check the tension on the belt. The only other thing that I can think of is the final drive belt front pulley has stripped out. The early belt drive bikes, the front belt drive pulley was very thin in the area where the splines were cut for the final drive gear. In 1994, Harley can out with an improved front pulley and offered a retrofit kit to replace the earlier models. When the front pulley strips the splines out, it will not drive the rear drive belt. The final drive gear simply turns inside the center bore of the pulley.

To change the belt on your Softail, you'll have to pull the outer primary cover, the entire primary drive mechanism, the inner primary, the starter, the exhaust system (to get the starter off), the rear wheel, and the swing arm. If the pulley is bad but the belt is good, you do not have to pull the rear wheel and the swingarm.

Good Luck
Steve

Apr 21, 2011 | Harley Davidson FLSTC Heritage Softail...

1 Answer

Can you change final drive belt on a softail without removing primary


No, you must remove the outer primary, the clutch assembly, primary chain and adjuster, the compensator sprocket, the starter, the inner primary, the rear wheel and the swing arm to change the final drive belt. It's a major job.

Good Luck
Steve

Mar 29, 2011 | 2005 Harley Davidson FXSTB - FXSTBI Night...

1 Answer

Change a drive belt


to change the final drive belt on your Road King, you must pull the entire primary off. The outer primary cover, the clutch and primary chain, the inner primary, and the starter must come off. Then, you have to remove the rear wheel, remove the shocks, and pull the swing arm out as well. It's a major job.

Good Luck
Steve

Feb 19, 2011 | 2000 Harley Davidson FLHR-FLHRI Road king

Not finding what you are looking for?
2011 Ultra Ground Pounder ST Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ultra Experts

Brad Brown

Level 3 Expert

18372 Answers

Ngoro

Level 3 Expert

2620 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6385 Answers

Are you an Ultra Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...