SOURCE: water leak
The small hole under the water pump is the weep hole and is designed to start dripping water when your pump has a problem. You should remove the pump and find out what the problem is before it quits and leaves you stranded. Could be simply the seal, or the shaft may have become pitted.
With the brakes, I assume you have looked at the brake pads and they are good so bleeding is definitely the first option. If that does not fix it remove the calipers and check that the pistons move when you squeeze the lever and that you can easily push them back into the caliper (after you disconnect the brake line). Then rebuild them if required and reinstall.
SOURCE: I was in repairing the clutch on my 90 YZ 125 and
There are 2 needle bearings in the clutch.
Please rate this answer. Thanks!
SOURCE: 1984 yz 125 power valve how do i set it
You don't have to do anything It does it on its own as long as the pieces are all there. The power valve is the thing that opens up a larger exhaust hole for the two stroke engine. It is shaped like a spool and it twists as pressure builds due to high rpm. On the 1984 it is on the left side of the bike right up front behind the clutch cover.
SOURCE: I have just aquired an old Cagiva 125 off road bike
Try contacting Piaggio who now own cagiva, directory enquires .Piaggio head office please.then give the frame number usually by the steering stem.
SOURCE: I have just aquired an old Cagiva 125 off road bike
The engine number can proove what engine type it is but engines can be changed over the years ,your best chance of finding out more info on the bike is to finf the frame number ,this will give you all the history on the bike ,as its very unlikely the frame has been changed since the bike was made.
62 views
Usually answered in minutes!
×