The 1996 fireblade holds 3.6 litres of 10 w40 sf grade engine oil. With the engine warm, Place machine on a suitible stand, remove filler cap, place a container under engine to catch oil, undo sump oil plug with a 17 mm spanner in an anticlockwise direction, be carefull not to alow hot oil onto your skin as it will burn, while this is draining into a container, undo and remove oil filter, with suitable tools, when replacing follow instructions on filter packet, top up engine oil until it meets the required level,start engine for a couple of mins, allow oil to settle before rechecking and if ness top up to the correct level
1,716 views
Usually answered in minutes!
×