Question about 1993 kawasaki ZZR 1100
I have accidentally unscrewed the remote tickover cable on my Kawasaki zzr1100 how easy is it to reassemble @
Hi, Francissande for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How to Replace Manifold How to Remove Choke Cable on Motorcycle
Replacing your Choke cable on GSX600
Kawasaki Ninja ZX 11 Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e
Posted on Apr 04, 2018
Put a carby kit through it and clean, inspect and blow all ports through, check intake rubbers for any leaks, (pin holes can change air fuel ratio) Especially check for obstructions in your idle/bypass jet, do the kit first so you know its right, then tune your idle mix until steady.
Posted on Feb 25, 2009
SOURCE: kawasaki zzr 1100 d model 19 97
find the coils and check the terminals with a tester to see if power is getting to them. if it is then it could be the coils or ht leads/ caps
if no power at coil then problem is between battery and coil or in the kill switch. check all ground / earth terminals you can find also
good luck, ride safe
Posted on Apr 02, 2009
Clean your carbs! Your floats might be sticking open a bit. Plus, all Kawasakis have a simple spring-actuated check valve in the fuel valve. This way, you can disconnect the fuel line without having to block the flow. Fuel could be leaking through the check valve. Your problem most liklely identifies dirty gasoline. Clean out your tank, your carbs, and change your fuel filter.
Posted on Apr 08, 2009
Bottom of motor there is about a 31/2" round cover with a bolt through the middle thats the filter you may have to remove the exhaust to get to it on your bike
Posted on Jan 30, 2010
Tips for a great answer:
Jan 08, 2018 | 1995 kawasaki ZZR 1100
Dec 23, 2014 | 1987 kawasaki GPz 1000 RX
Mar 04, 2013 | 1994 kawasaki ZZR 1100
Mar 14, 2011 | kawasaki ZZR 1100 Motorcycles
Feb 27, 2011 | kawasaki EL 250 Eliminator Motorcycles
Apr 10, 2010 | 1996 kawasaki ZZR 1100
Feb 24, 2009 | 1992 kawasaki GT 750
Jan 03, 2009 | 1999 kawasaki ZZR 1100
61 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: