Question about 1995 Yamaha FZR 600

1 Answer

1998 fzr 600 yamaha put it in gear let the clutch out nothing happens, pulled the clutch looks new.Do i have to pull the engine to pull the transmissiom out?

Posted by whc_boomer on

Ad

1 Answer

ostapchenkob

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

There should be an adjuster screw and lock nut on the clutch cover plate that will adjust the play in the clutch mechanism and cable. adjust that and play with the clutch until it engages and disengages correctly

Posted on Jul 28, 2011

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My ignition and fuel pumps on my yamaha fzr 600 but when I push the start button nothing happens


Hi, Anonymous and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Faulty starter button/switch.
6. Faulty jiffy stand or clutch pull in switch/sensor.
7. Security alarm needs a reset.
8. Starter control circuit, relay, or solenoid faulty.
9. Main fuse or circuit breaker blown or faulty.
10. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have nice a day.
Will Not Turn Over The FZR Forum
96 fzr 600 wont start pleeeze help me
https://www.tradebit.com/filedetail.php/269137237-yamaha-fzr600-1989-1999-factory-service-repair-manual
OEM parts for Yamaha
http://www.fzrarchives.com/fzr600/600_manual/1999fzr600r.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Apr 14, 2014 | Yamaha FZR 600 Motorcycles

1 Answer

Engine revs but nothing happens


Replace the clutch plates or adjust the clutch cable. Try the clutch cable first. What you have is a slipping clutch. It could be that the clutch cable is too tight and so the plates aren't mating fully when you release the lever, or it could be that the plates are worn out. But as it is getting worse it is most likely to be the clutch plates are worn.

Sep 10, 2013 | 1991 Yamaha FZR 600

1 Answer

I have a 93 yamaha fzr600 will not start cant even jump start what is the problem


Hi, John and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Faulty starter button/switch.
6. Faulty jiffy stand or clutch pull in switch/sensor.
7. Security alarm needs a reset.
8. Starter control circuit, relay, or solenoid faulty.
9. Main fuse or circuit breaker may be blown or faulty.
10. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have nice a day.
FZR Won Start The FZR Forum
93 FZR 600 wont start
https://www.tradebit.com/filedetail.php/269137237-yamaha-fzr600-1989-1999-factory-service-repair-manual
OEM parts for Yamaha
http://www.fzrarchives.com/fzr600/600_manual/1999fzr600r.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Dec 22, 2012 | 1993 Yamaha FZR 600

1 Answer

I have a 1992 yamaha fzr 600 turn the key nothing charge it nothing bump start it it runs for about 2min then dies no power getting to the bike dose not engage nothing it was running last week help!!


Hi, Anonymous and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Faulty starter button/switch.
6. Faulty jiffy stand or clutch pull in switch/sensor.
7. Security alarm needs a reset.
8. Starter control circuit, relay, or solenoid faulty.
9. Main fuse or circuit breaker may be blown or faulty.
10. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have nice a day.
http://www.fzrarchives.com/fzr600/600_manual/1999fzr600r.pdf
OEM parts for Yamaha
https://www.tradebit.com/filedetail.php/269137237-yamaha-fzr600-1989-1999-factory-service-repair-manual
93 FZR 600 wont start
Will Not Turn Over The FZR Forum

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Dec 14, 2012 | 1992 Yamaha FZR 600

1 Answer

1996 fzr 600 wont start


Hi, Anonymous and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Security alarm needs a reset.
10. Starter control circuit, relay, or solenoid faulty.
11. Main fuse or circuit breaker may be blown or faulty.
12. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
13. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
96 fzr 600 wont start pleeeze help me
My 1993 Yamaha FZR 600 Won Start
Yamaha FZR 600 Service Manual
OEM parts for Yamaha
http://www.journey.cz/moto/navody/Yamaha%20FZR%20600%201999%20owners%20manual.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Mar 06, 2012 | 1995 Yamaha FZR 600

1 Answer

I have a 92 fzr 600 when i engage my clutch amd shift into first it dies like the clutch isnt engaged. i checked the clutch cable and it seems to be working fine


With the engine not running can you select 1st gear pull in the clutch lever and push the bike with no difficulty, if you cant, it may be the clutch plates have become stuck together, this can occure from standing for long periods, if you can push the bike it may be the neutrol safety switch, or the side stand safety switch have become faulty, and cutting the bike out as a precaution

Jul 25, 2011 | 1992 Yamaha FZR 600

2 Answers

1997 Yamaha FZR 600 cuts out when shift into first gear


Does the bike have a sidestand switch that cuts the power if the stand is left down? If it does, disconnect it and temporarily join the ends together and try starting....

Mar 20, 2009 | 1994 Yamaha FZR 600

Not finding what you are looking for?
1995 Yamaha FZR 600 Logo

500 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

gbob59

Level 3 Expert

3063 Answers

randymanfive

Level 3 Expert

501 Answers

Cindy Wells

Level 3 Expert

6164 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...