Fill the master cylinder with brake fluid, leave the cap off, open bleeder on left front wheel cylinder till fluid begins to come out and close the bleeder. Go to the right front and bleed it, this is gravity bleeding and works fine without a helper to pump the pedal, when fluid starts to come out close bleeder. Now go to the right rear and bleed it the same way. Then lastly, the left rear. Bleed it and you should be done and with a good pedal. If you don't have good pedal, you'll need someone to pump and hold the brake down as you bleed each one from the closest to master cylinder around to the farthest from it in sequence. It's the only way to bleed brakes.
SOURCE: I need an AMC Eagle 1981 Belt Diagram.
Hi there,
The Gates Corporation,s website;
http://www.gates.com/index.cfm
will help you identify which belts & hoses fit your vehicle, or any vehicle as long as you know what engine is in it!
Cheers, Stevie-RayG
246 views
Usually answered in minutes!
×