Question about 2008 Harley Davidson FLHRC Road King Classic
Find your rear brake master cylinder. The find the metal line that comes out of the rear of the master cylinder. Follow this line all the way back to your rear brake caliper. Look for broken lines or leaks. Check your rear brake master cylinder reservoir to make sure you have brake fluid in it. Fill the reservoir with the recommended type of fluid. The proper type of fluid is printed on the top cover for the reservoir. Never mix the different types of brake fluid, they are not compatible. Once you fill the reservoir, you must bleed the brakes.
To bleed the brakes, you perform the following steps in this exact order. First, slowly depress and release the rear brake pedal a few times. Then, press the rear brake pedal and hold it. Open the bleeder valve on the caliper and allow all air or brake fluid to escape. Close the bleeder valve. Release the brake pedal and again depress and hold it down. Open the bleeder and allow the air and fluid to bleed out. Close the bleeder valves. Release the brake pedal. Check the level of the brake fluid in the reservoir. Do not allow the reservoir to run dry. If you still don't have a good brake pedal, continue to bleed the brakes until you get brake fluid with no air bubbles in it.
If after you have thoroughly bled the brakes you cannot get a pedal, you either have a mechanical problem with the brake pedal or the master cylinder needs rebuilding.
Posted on Feb 09, 2011
Tips for a great answer:
Usually answered in minutes!
Step 2: Please assign your manual to a product: