Hi guys, just researching the rmz450"s. What

Hi.
I don't know if this is the case or not, but most burners will fail if you try to use an off name type of disk.
I have had a burner in my computers for several years now, and here is what I have found.
TDK, Maxell, and Dynex brand disks work almost every time.
Sony disks work most of the time, but only at lower to medium speeds.
Memorex disks are a crapshoot, you could have a stack of 50, and maybe 3 or 4 will fail, and then again, maybe 15-20 will fail.
GQ brand works great at slower speeds, but fail alot at high speeds.

Also, you may want to invent in a lens cleaner disk, as it might be that three is dust and dirt inside your burner, and that is what is causing your burner to fail out no you.

I hope this helps you out, and good luck to you.

Usually a locksmith can cut one if he has the vin number. There is a code that reveals how the key should be cut. I had a similarar problem and the guy just looked through the windshield at the vin number and cut a key.

they can be spliced easily,and any mechanic can do it.another fine example of why car owners are poor

usual smoke is caused by oil overflow. you may want to drain this one out, check your O-rings and rubber seals, im 99% sure that is the culprit.

regards.

If the blower is your problem, then it's probably the switch. If it was just working on high before, and now it's not at all, that's your first clue.

Hi Debbie,

Check the picture format setting on your Sky box.

Press Services.
4 for set up.
1 for Picture.

Theres and option that says 16:9, 4:3 or 4:3LB, make sure its set to 16:9.
Then go to Save settings and press the Select button to save the setting.

Regards

Andy

Hello,
You need to carry the camera to the Canon Care Centre and the LCD will be replaced.
Warm Regards,
Manoj Joseph
91 9352008418

hi

Ive done some research and i haven't found any conclusive ending however the best i can do is tell you the round about RMS which is approx 200 to 150 unbridged.