Hi there. Were can i find a kx 250 complete enjin

Not to worry friend, when my car go sick i avoided going to mechanic looking for DIY_Repair when I found this website https://big-manuals.com/ and this book helped me repair it within an hour, all by myself!!!
From wiring diagrams, schematic illustrations, spark plugs info, parts info, chassi s number, valve time settings, step wise instructions, torque specs, error/fault codes, engine info, to every single minute parts, you get everything in there you can't imagine how detailed it is

Suck it out with a hose ... remove the tank and dump it ... pump it with a pump ... draw it out with a turkey baster. This isn\'t difficult.

Hi,

You could buy a new handset from :-

http://cgi.ebay.com/PANASONIC-KX-TGA560M-5-8-GHz-CORDLESS-HANDSET-/230557643171?pt=LH_DefaultDomain_0&hash=item35ae4e71a3

The cost of the handset is less than $25. If the unit is under warranty ( less than i year old ), you could contact the service center and get it replaced without any cost.

The average cost of repair is around $75 on this set for display. That is one of the reasons why we recommend buying a new handset. This is a common problem on most of the handsets. We did everything that we could - swapping batteries and making sure that it is properly registered.

I know, it is not a good new, unfortunately there is no reset button unless you take it apart and look for a loose wire or connection. That is the only possibility.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

ebay or bikebandit

there is the problem in the clutch plates kindly remove it by the new one otherwise it will leads to the choking of engine

Be sure you were given the correct cable, The stock cable is part number 54011. Compair the old cable to the new one.

try nexted hottest plug for ex. i had a b8eg standard and went to b7eg

Your clutch needs help (adjusting/replacement). It stuck in gear right now.

Hi!
Help is at Hand (Excuse pun),
This problem described strongly relates to a seizing clutch cable or frayed.
If you remove it try and pull/push the inner with your fingers there should be No resistance, you may get away with a good oiling but I would recommend replacement.
Good Luck!
Paul 'W'
Onyer~EDson(:0) {#><
Please remember to politely rate my effort!