At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: Why does my yz 80 1993 stall when im not moving and i...
Your clutch is grabbing, adjust the cable so that it pulls harder on the clutch. If this does not help you may need to take the cluth out and inspect it for bad springs or damage
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Mechanical issue: clutch not disengaging completely...
engine off - put in gear and roll back and forth with clutch released does engine stop the bike from rolling? Now pull clutch lever in and try rolling again is clutch cable adjusted properly?
Electrical issue: bike thinks clutch is still engaged and kills motor when not in neutral
Is the clutch switch properly connected and working? Is it adjusted properly? Use a multimeter to read resistance across switch contacts does it change state when clutch is pulled in?
The PW80 does not have a manual hand lever clutch, its a 3 speed semi auto. The bike will jerk and shut off when put in gear. If I put it in gear while rolling then it will work. Any ideas?
A shft is broke or bent bad or a bearing got real hot and welded itself to the shaft. If you can roll down a hill and put it in gear and jump it off its one of the two prior problems. it it want start the motor might be seized up.
If you can see the actuator moving, but not disengaging the clutch, it usually means that the clutches are hanging up in the basket, or the actuator is bad and not releasing the clutches. The only way to tell is to take off the clutch cover and watch what happens when you pull the clutch.
the plates will stick to each other because of oil check the clutch lever at the motor and make sure it is moving the arm that pushes the pressure plate and make sure it is moving
×