Question about 1984 Honda VT 500 C Shadow
I removed the tail light from an 84 Honda shadow vt500 and now I am trying to wire it back up, problem is can't remember how it was wired and the wires aren't long enough and are just hanging down underneath the rear fender
Your clutch plates have lasted 25 years. It is probably time to get some new plates. Have your dealer get you a set of Barnett clutch plates.
Posted on Apr 22, 2009
if the tail light is working, then look at the sensor, it is placed under the seat( it is a small black box 2x1,5cm) disconnect and clean contacts. Also put some contact spray in other wire joints.
Sorry for my English
Posted on Apr 23, 2009
they do not shine, only flash for turns.They do not do the same as the front ones.
Posted on Apr 12, 2010
Testimonial: "Very cool. Thanks!! "
Tips for a great answer:
Aug 30, 2013 | Motorcycles
Jul 09, 2013 | Motorcycles
Sep 04, 2017 | 1984 Honda VT 500 C Shadow
Oct 04, 2011 | 1984 Honda VT 500 C Shadow
Nov 13, 2017 | 1984 Honda VT 500 C Shadow
246 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: