Ok i have a 95 ford aerostar van and i need to hook up a wiring harness to pull a trailer but i need to know the color code for the wiring in the van ????

If van came with it brand new you might have to the dealer you got it from to have that option turned on in the ECU ... Or it might not have been connected to the wire harness at the rear of the vehicles wiring harness .. Hope that helps ...

Sidelight, break light, turn signal. You can use a test meter to identify.

What is the color code for trailer wiring? On a 4-Way flat trailer wiring harness, white is the ground, brown is running lights, yellow is left turn signal and green is right turn signal.

Standard Color Code for Wiring Simple 4 Wire Trailer Lighting ...

..

too many miles. not worth it regardless of price.

Its easier if you get the $6 harness piece and attach it to the stereo harness and plug it in. Than to splice the wires on there. But here is the wiring color codes http://www.the12volt.com/installbay/stereodetail/795.html

some van don t have a ground wire. hook up to trailer put jumper cables to frame of trailer and van if works install a ground wire plug

if they have color coded wires that are brown,green,yellow and black then its possible.but i don`t think so.you can buy a trailer wire adapter that just plugs into the car factory wiring so you don`t have to splice(solder) the wires into the car wiring and it will show you the area for the connection and picture.if you don`t want to go that route then the tail light wires colors are brown.the left signal color is yellow and the right is green and the ground wire on the car is black but on the trailer wire harness it is white.

green wire right turn, yellow wire left turn, brown wire marker and white wire ground. make sure you have a good ground. Wires on the van should be same color. Check van plug for working connector with test light. The ground is the most common problem, providing all connections are correct.

The rear lights :

Brown is the parking lamps ( either side )

Driver's side Stop / Turn : Light green w/ White stripe wire
Pass Side Stop / Turn : White w/ Light blue stripe wire

Another option ( for use with the factory trailer circuits ) is to add / replace the factory tow adapter. eTrailer has them, if you are interested. This is the type adapter as Ford p/n: YL3Z-13A576-G. You would need to install the relay and the fuses for the trailer circuits if you do this.

if the plug ends are the same it should work and you may have to take a plug from the aerostar and use that plug on the windstar

I believe you can look up the manufacturer of the trailer plug kit and find the wiring diagram there. On alot of the trailer plug kits, they have pics and diagrams in the package. The 7 pin plug (truck side) is available with the pig tail set up that plugs directly into the wiring harness for the lights. Then all you would have to worry about is the 2 wires for the electric brakes.