Getting an f1 indicator on mph display wont start have to turn off key and turn key back on to get f1 off

it actually means fault indicator and doesn't deal solely with the fuel injection.

put the key in the ignition and turn it on, but don't start the bike. use the mode button to go to the odometer display, then hold the mode button down for 2 seconds. the code should be displayed.

come back when you have the code

It may be asking you to press the "F1" key because it is having a hardware problem which should be checked, or you may need to adjust the settings in BIOS. It can also be an indication that you need to replace the CMOS battery. Try this: Go to your BIOS and load default settings.2 Mar 2012

Press F1 key to start Windows - Ccm.net

ccm.net/faq/9372-press-f1-key-to-start-windows.

also go to this link might help you out. Press f1 start windows Google Search

Turn on your computer. If your computer is already on, then reboot it. You need to see the initial display screen to get into the BIOS. Press the F1 key immediately in one second intervals when you see the initial screen displaying the BIOS provider information. The majority of Gateway computers use the F1 key. If, for some reason this does not work, then use the F2. All of Gateway's desktops use the F1 or F2 keys. this will vary depending on your computer and operating system Press and hold that key during the boot up process to enter BIOS using the arrow keys load failsafe defaults or load optimized defaults press escape then press f10 to save to cmos to restart. Hope this helps.

1 - Function Keys f1 through f122 - Configurable Function key fnDisable fn in the BIOSTo disable, or enable, the function key (fn) in the BIOS, do the following steps.

1. Press the power button to turn on the computer.
2. Press the f10 key to open the BIOS setup window.
3. Use the right-arrow or left-arrow keys to navigate to the System Configuration option.
4. Use the up-arrow or down-arrow keys to navigate to the Action Keys Mode option, and then press the enterkey to display the Enable / Disable menu.
5. Select the desired mode:
   • Disabled : Requires pressing fn key + f1 through f12 to use the action as indicated on the action key.For example, if Disabled , pressing fn + f11 will mute the sound as indicated on the key on this model PC. Alternatively, pressing f11 only will minimize and maximize a web browser if open.The action keys may vary depending on the model of notebook.
   • Enabled : Requires pressing only f1 through f12 to use the action as indicated on the action keys.For example, if Enabled , pressing f11 only will mute the sound as indicated on the key on this model PC. Alternatively, pressing fn + f11 will minimize and maximize a web browser if open.The action keys may vary depending on the model of notebook.
6. Press f10 key to save the selection and restart the computer.

The function key (fn) option can be reset at any time.

To start the Setup Utility program, do the following:

1. If your computer is already on when you start this procedure, shut down the operating system and turn off the computer.

2. Press and hold the F1 key then turn on the computer. When you hear multiple beeps, release the F1 key.

Notes:

a. If you have a USB keyboard installed on your computer and the Setup Utility does not display using this method, turn on the computer, then immediately press and release the F1 key repeatedly until the Setup Utility displays.

b. If a user password or an administrator password has been set, the Setup Utility program menu is not displayed until you type your password.

I hope this helps.

Mike

On the left of your dash is a pair of buttons, one for selecting/changing the odometer and the other for cycling from MPH to KMH and back.

Turn the key on.

Push the select button until your display indicated the remaining oil life percentage. When it is displayed press and HOLD the select button until it begins to flash. Once it starts flashing release the button and press and hold it again. The display will clear and if you release the button and cycle through the display with the select button you will see oil life 100%.

replace your cmos battery inside... look for a technician for assistance to remove the cmos battery and change a new one... your battery is weak already

this is sometimes due to the boot sequence. identify the key to press so that you can access its bios at start up. a shot message is usually displayed for a short time at start up.
please go to the bios and change the boot sequence to start from HDD.

Hi, usually to get into bios on a toshiba laptop you press and hold the Esc key or the F1 key. try both of these, if they dont work, try this: 1. Turn on computer by Holding down power button while pressing the ESC key. The machine will beep, then display: Check System, then press [F1] key. 2. Release ESC key 3. Press F1 key If none of these work, we may have a different problem all together, get back to me if so, and i will see if we can find a solution. Hope this helps! Si :)

IBM Thinkpad error code 19990301 is a Hard-Disk sector problem. Basically your hard-drive is faulty and you need to replace it. This is why it wont boot; because the area of the hard-drive that stores data is damaged.