Question about 2006 Yamaha Ybr 125

Open Question

2006 Yamaha Ybr 125 flasher relay location - 2006 Yamaha Ybr 125

Posted by dannattrass on

Ad

4 Related Answers

Anonymous

  • 101 Answers

SOURCE: Front sprocket

Hi ........... One tooth less will give you more top speed (if you can pull top revs) but will reduce accelleration. If you go for one tooth less you'll need to tighten the chain and/or remove a link. It's a trade off ............ decide what you want the bike to do.

Posted on Dec 24, 2008

Ad

tombones

  • 3567 Answers

SOURCE: Stiff / Locking rear break on YBR 125 58

Take the wheel off and remove the brake hub. Now clean out all the dirt and mud from riding in the creek and through mud puddles. The brake shaft has dried mud on it and can not rotate freely in the hub. You will probably need a plastic hammer to punch it out of the casing. clean the shaft and the casing hole the shaft goes through. Grease the shaft with waterproof grease.

Please rate this solution. Thanks!

Posted on Mar 29, 2009

Ad
robotek

Graeme Ross

  • 1512 Answers

SOURCE: yamaha ybr 125 top speed

Hi les
Not much to start with here unfortunatly mate. A free flow muffler will help top end speed, change the factory airbox to a K&N style pod air filter, other than that, hugging the tank at top speed :) If you do change these parts, you may also need to increase the main jet size to richen up the mixture for better tuning of the motor with the better flowing parts. This bike has a top speed of 100kmp and produces 10 hp, so you may only expect to get at best less than 1 extra neddy, and perhaps another 5 km/hr.... I suggest upgrading to a bigger machine of you feel the need for speed :)
If its 125's you are into, test drive a Honda CBR 125R 6 speed fuel injected 13.4 horsepower, and good for 120km/hr
regards robotek

Posted on Jul 10, 2009

Anonymous

  • 653 Answers

SOURCE: Yamaha Ybr 125 Motorcycle The hurn does not work

If all other electricals works then just replace the horn (hurn?)

Posted on Nov 09, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Yamaha Ybr 125 Motorcycle The hurn does not work on my ybr


If all other electricals works then just replace the horn (hurn?)

Nov 06, 2010 | 2006 Yamaha Ybr 125

1 Answer

Front sprocket


Hi ........... One tooth less will give you more top speed (if you can pull top revs) but will reduce accelleration. If you go for one tooth less you'll need to tighten the chain and/or remove a link. It's a trade off ............ decide what you want the bike to do.

Dec 24, 2008 | 2006 Yamaha Ybr 125

1 Answer

No full beam on my YBR


I would say your have a problem with a headlight relay. It uses a switch to direct power to either filament of the headlight. This could have blown, leaving you with only the lower filament working.

The regulator and rectifier deal primarly with the charging system.

Nov 21, 2008 | 2006 Yamaha Ybr 125

Not finding what you are looking for?
2006 Yamaha Ybr 125 Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

gbob59

Level 3 Expert

3063 Answers

randymanfive

Level 3 Expert

501 Answers

Cindy Wells

Level 3 Expert

6184 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...