Question about Honda Activa Motorcycles
An expert who has achieved level 3 by getting 1000 points
First of all it is for sure that water had seeped into your electricals. So open the covers and wipe dry the coils, the wires to the plug, the wires to the ignition unit. make sure that there is no water in your fuel.remove the plug with the plug spanner supplied.Kick or use the starter to check for the spark on the plug ( which was also cleaned). If no spark then check again on the ignition system, the coils the contacts to confirm the fault. After a good spark is seen fit it back again and start. It must start for sure.Other wise repeat the process. I hope you get this right. Good day
Posted on Aug 04, 2010
831 views
Usually answered in minutes!
mustafa very nice solusion
×