Question about 2003 Yamaha YZ 125
You don't decode it. It is only a production run series number. Mororcycles are like cars in that respect. It is the frame number, AKA the "VIN number", is what carries all the information. Call a dealer with the frame number and he can tell you year, paint color, specific model and more. They may have a problem if the bike is too old. Yamaha changed to a newer code system a few years back.
Can I get a “very helpful” rating on this answer?
Posted on Aug 28, 2009
SOURCE: yz 125 water pump seal
GET A SMALL SCREW DIVER IN BETWEEN THE SHAFT AND SEAL PRY IT OUT WITH OUT DAMAGING THE SHAFT THEN USE A SOCKET FROM A TOOL KIT THAT FITS PERFECTLY AROUND THE EDGE OF THE NEW SEAL TO HAMMER IT BACK IN
Posted on Aug 31, 2009
There are only two adjustments to make on your carburetor; the idle speed, and the idle mixture adjustment. If the spark plug fouls frequently, first make sure you are using the correct spark plug. Your 1997 YZ125 uses an NGKB9EGV. Then be sure you are using the recommended two stroke oil, mixed to the proper ratio, in the fuel. Also make sure the air filter is not excessively soiled.
With all of the above confirmed and corrected, start the bike and run until the engine is up to normal temperature. Adjust the idle mixture screw to attain the fastest idle and best throttle response. Then adjust the idle speed.
If you are still fouling the spark plug, verify that the carburetor has the correct size jets by consulting your owner's manual. Keep in mind that if you are operating your bike at an altitude higher than about 6,000 feet above sea level, the stock jetting may be too rich. Down-size the main jet in small increments until satisfactory operation and the correct spark plug color is obtained.
Posted on Nov 02, 2009
Tips for a great answer:
Oct 10, 2010 | 2003 Yamaha YZ 125
Dec 03, 2017 | 2003 Yamaha YZ 125
400 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: