Question about 2000 Harley Davidson FLHTCUI Electra Glide Ultra Classic
My 2007 Harley-Davidson will not start. I have replaced the battery and still will not start. There is a click noise that is coming from down around the battery. Checked the fuses but they seem to be ok. Please help @
The click means the start relay is getting power,just not enough or it may be bad.Check cables to the starter from start relay also.
Posted on May 07, 2010
Hi, Kmartina1133 before testing any electrical component in the Starter Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries. Depending on battery voltage starter relays and starter solenoids can make the same noise when you hit the starter button. You can easily determine which one is at fault by two simple tests:
STARTER RELAY- place your thumb and index finger on the starter relay and press the starter button, if you feel the click then the relay is faulty and needs to be replaced.
STARTER SOLENOID- bridge the positive and negative poles of the solenoid with a small screwdriver if you get a loud clunk then the solenoid needs to be rebuilt or replaced as necessary. If the engine turns over then replace the starter relay.
A motorcycle starter relay is an electronic mechanical switch that has a small coil winding around a piece of metal that requires low amperage and thin wires to be activated. When you turn on your ignition switch power 12 volts is sent to the relay coil which in turn becomes a magnetic contact point that pulls a spring-loaded contact point to itself completing an electrical circuit that allows more amperage necessary to be accessed by the starter solenoid which in turn acts in the same way as the relay but on a larger scale with its stronger heavier contacts making available the necessary amperage to turn the starter motor. If your battery has low voltage it, in turn, makes the magnetic contact point weak in trying to pull its counterpart to make a connection. These relays are usually encased in a plastic housing that is sealed, depending on the quality of the product. When activated they will produce a small amount of heat to their metal components which in turn can create the perfect environment for condensation to form depending on weather conditions and how careless you may be with a water hose or sprayer while washing your bike. After a period of time, several months to several years depending on the circumstances this condensation is the starter button for electrolysis and the slow build-up of corrosion which ends by preventing the magnetic contacts in making a solid connection and alerts you to this situation with the customary greeting "CLICK or BUZZ" if you get a single loud "CLUNK" then the starter solenoid is at fault and needs to be rebuilt or replaced as necessary. The relay is inexpensive and needs to be replaced however in a pinch they can be forcibly opened cleaned and resealed with silicone. In a nutshell, motorcycle starter relays take in low amperage and send out higher amperage when activated and for curious minds, the voltage remains constant at whatever your battery reads at the time.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at [email protected] Good luck and have a wonderful day.
https://www.6ya.com/ To speak to me personally $6
Posted on Dec 05, 2019
Like Joe Wing said, usually this is a bad starter relay, about a $10 part.
Posted on Apr 07, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Apr 24, 2018 | 2007 Harley Davidson FLHX Street Glide
Mar 10, 2018 | 2007 Harley Davidson FLHRC Road King...
Jan 17, 2018 | 2007 Harley Davidson FXDC Dyna Super Glide...
Dec 04, 2016 | 2007 Harley Davidson FLSTF Softail Fat Boy
Feb 09, 2014 | Harley Davidson Motorcycles
Jan 01, 2014 | 2007 Harley Davidson FLHTCU Ultra Classic...
Nov 14, 2012 | Harley Davidson FLSTC Heritage Softail...
Aug 17, 2011 | 2005 Harley Davidson XL 1200 C Sportster...
Mar 22, 2011 | 2007 Harley Davidson XL 883 Sportster
Jan 26, 2020 | Motorcycles
941 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: