Question about 1997 kawasaki ZX-9R Ninja
Were is the indicator relay on a Kawasaki zx9r c2 please @
Take riders seat off, undo small bolt in front of take. Will now lift up on rear hinge. Remove long bolt from rear hinge, remove fuel pipes and lift off.
Posted on Aug 12, 2009
I would start with a main harness inspection and all pigtails check for worn or bear wire make shure all connections are solid and secure! good luck!
Posted on Sep 08, 2009
this site has a manual that you can use, put the new loom next to the old and install as you unplug the old,
Posted on Nov 15, 2009
SOURCE: Changing the oil/oil filter
I just got a 97 ZX9 and had the same issue... until I read the service manual. You need to remove the oil pipe flange bolt in order to get enough room to be able to remove the filter between the exhaust header and the motor case. Of course, unthreading the filter is an issue by itself. If you do not have the cap (tool) that fits over the end of the filter and provides access for a rachet tool to unscrew it, then you probably need to do what I ended up doing... punching a screwdriver through the old filter in order to gain the leverage needed to start unscrewing the filter.
Posted on Apr 12, 2010
Tips for a great answer:
Apr 20, 2014 | 1997 kawasaki ZX-9R Ninja
277 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: