Question about 2008 Honda CBR 1000 RR Fireblade

Open Question

2008 Honda CBR 1000 RR Fireblade do I need an O2 sensor with a performance exhaust system

What's the story on the 08 blade oxygen sensor if you remove the cat and end can and fit a noncat mid pipe and race can.Do you need to drill and fit the original O2 sensor or remove it altogether?? Also going to fit PC V and autotune. Hearing different versions, any help appreciated. Adrian @

Posted by adrian_mumby on

Ad

5 Related Answers

bikedoctor

  • 33 Answers

SOURCE: low on power

Be sure pwr commander throttle position is calibrated and reading 0% when closed.

Posted on Feb 09, 2009

Ad

Anonymous

  • 22 Answers

SOURCE: honda fireblade slips out of 2nd &3rd gear at 7500rpm,8000rpm

need to re do the trany

Posted on Feb 25, 2009

Ad
robotek

Graeme Ross

  • 1512 Answers

SOURCE: Rebuilding a Honda 2004 CBR 1000 RR Engine I just

Hi Paul,
You can download a copy of the entire manual, torque setting, head stud pattern, and every other usefulbit of info from here. Godd luck with the rebuild, let me know if you have any dramas with the manual. Cheers. 
regards robotek

Posted on Apr 08, 2009

Anonymous

  • 132 Answers

SOURCE: Hona CBR 125r exhaust

remove the belly pan,undo the radiator there are 2 bolts either side of the manifold undo these and the bolt at the rear near the silencer. the exhaust should now be able to be removed.

Posted on May 23, 2009

Anonymous

  • 5 Answers

SOURCE: how or where to get the services manual cbr 1000

you can type in SALTERS MOTORCYCLE MANUALS and when the site comes up their will be a list of bikes on it so under honda you will find cbr1000rr their might be a few different types such as service manual,microfiche manual or manerfactures manual you can down load these for free ok buddy safe driving keep it between the ditches

Posted on Feb 24, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Location of the engine oxygen sensor for a 2009 Buick lucerne


There are at least 3 oxygen sensors. There is one on each side of the exhaust system as the exhaust leaves the engine. These are the upstream sensors. The exhaust then goes to catalytic converters. If you have two, there is a sensor after each one. These are the downstream sensors. Before replacing a sensor, uou should determine if it is bad. Trouble codes indicating problems with the oxygen sensing circuits may have many causes other than a bad sensor. Also be advised that a special socket is needed to remove an oxygen sensor.

Nov 12, 2017 | Buick Cars & Trucks

1 Answer

1998 Infiniti I30 trouble code P0134 were are the oxygen sensors?


code p 0134 refers to heated oxygen sensor(HO2S) 1 bank 1--no activity detected ===causes ---wiring open circuit--heating inoperative---HO2S sensor
it also refers to oxygen sensor (O2S) 1 bank 1 --no activity===causes wiring -- oxygen sensor
HEATED oxygen sensors are in the exhaust manifold or exhaust pipe before the cat converter
oxygen sensors are in the exhaust pipe after the cat converter
bank one is the side closest to the radiator on a cross fitted engine or on the lhs with you facing the fan

Aug 10, 2016 | Infiniti Cars & Trucks

1 Answer

How many 02 sensor and how many wire each sensor


depending on the engine make
v8 and v6 have 2 oxygen sensors( O2S) , one after each cat converter with 2 wires and 2 heated oxygen sensors ( HO2S) in the exhaust manifold/ pipe before the cat converter with 4 wires each
6 cyl and 4 cyl engines have one oxygen sensor after that cat converter and one heated oxygen sensor before the cat converter

Mar 24, 2016 | Cars & Trucks

1 Answer

Anyone has a diagram or pictures from 1995 Mercury Villager showing the location of the two Oxygen sensors, and which one is Front and which one is Rear? Thanks in advance


oxygen sensor are located before the cat converter and after the cat converter. The unit before tha cat converter is normally in the exhaust manifold or in the exhaust before the cat _ it is a heated oxygen sensor (HO2S) the one after the cat converter is located either in the end of the cat or close to in in the exhaust pipe. Its defines as an oxygen sensor (O2S). If you have 2 cat converters (V engines) there will be two of each

Jan 22, 2015 | Mercury Cars & Trucks

1 Answer

2005 Nissan Altima 2.5L - where is the heated oxygen sensor number 2 located


Oxygen sensors are mounted either side of the catalytic converter. Number 1 is mounted before the cat in the down pipe and the Number 2 is in the exhaust pipe just after the cat, think the number 2 is the downstream.

Jan 05, 2014 | 2005 Nissan Altima

3 Answers

Catalytic converter needs replaced, want to do it myself but need a set of instructions or a manual. thought i could find one on the internet but not having any luck.


Visit your local library and take a look at their motor manual collection for general instructions for this procedure.

Mar 03, 2011 | 2003 Toyota Highlander

1 Answer

Were is the oxygen sensor located


Oxygen sensors are located on the exhaust pipe near the engine. You can usually find them if you get under the vehicle and follow the exhaust pipe towards the engine until you run into the sensor sticking from the pipe with 2-4 wire pigtail attached. To test it you will need to know the proper values to read with a multimeter, or an autoparts house may be able to do it for you. To remove the O2 sensor: unplug it from the wiring harness and fit a box end wrench over the pigtail and onto the sensor, turn counter-clockwise to remove. Using the open end of the wrench may strip the hex on the sensor. Hope this helps!

Jan 22, 2011 | 1987 GMC VanDura

3 Answers

How to replace oxygen sensors...where are they located


Follow the exhaust pipe from the manifold and you will find your sensors sticking out at 90 degs from the pipe, follow the wire and disconnect from the terminal. you will need a ring spanner or special socket normally about a 22mm ( varies from sensors to sensor ) and unscrew anti clockwise, then just fit new in reverse order

Oct 05, 2010 | Ford Taurus Cars & Trucks

2 Answers

Oxygen sensor replacement


you need to rent an 02 sensor socket and use a ratchet and the socket to remove it, there are two on the exhaust pipe one before the cat, you can see it on the exhaust pipe and one after. normally the 1at one goes out. cost $75.00 please rate if helpful.

Aug 14, 2009 | 2005 Honda Accord

1 Answer

CODE 430 ON BANK 2.. RUN FIND .. 124 THOUSAND MILES WITH A FULL TUNE UP AND F.I. CLEAN ALSO..


needs y/cat pipe would also recomend replacing all oxygen sensors with it as well as using a gm cat pipe as they fit and function way better ten aftermarket

Jun 08, 2009 | 2003 Chevrolet Suburban 1500

Not finding what you are looking for?
2008 Honda CBR 1000 RR Fireblade Logo

Related Topics:

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6480 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...