Question about 2001 kawasaki EL 250 Eliminator V
My Kawasaki el250 is breathing out of the gearbox @
SOURCE: Kawasaki EL250 carburettor
Turn off the gas and remove the float bowl. Remove the fuel line. Remove the float pin and float with needle valve. Do not bend the tang that the float needle sits on. Spray carb cleaner into the seat where the needle valve came from to clear out any trash in the valve casing. Spray the float bowl and interior of the carb. Remount the needle and float back in place and put the float bowl back on. Install an in-line fuel filter. The diagram below shows a 1994 carb Yours will be the same or close to it.
A “very helpful” rating on this answer? Thanks!
Posted on Jul 03, 2009
If it dies when put into gear then its the side-stand switch (stand is down or switch not working)
If it dies when the clutch lever is released then either it was released too quickly with not enough revs, the engine doesnt have enough power to pull away or possibly the clutch switch is working in reverse
Hope this helps.
(If it does then please mark this as 'useful')
Posted on Jan 29, 2010
SOURCE: Hi Trying to find out the
Hi! The carb model for your kawasaki is EL 250-E2. If you want to know the specific part number of the carb parts please click on the link I provided. Hope this helps and thank you for using FixYa! Please click here http://www.cheapcycleparts.com/model_years/1711-kawasaki-1992-eliminator-250-EL250-E2/assemblies/22368
Posted on Sep 02, 2010
Tips for a great answer:
105 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: