- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sticking "Dog" the part of the starter motor that engages with the stater ring. Remove Starter motor, check the spring on the dog ( the shaft that comes out of the starter motor) its a faff to repair best replace starter motor
Take a look at the starter solenoid. There are two larger wires, on the back. One from the battery positive, (main hot wire), the other goes to the starter motor (If you jump these terminals the starter will spin but will not engage the flywheel). Look at the wires and nuts on the solenoid, especially the starter motor side make sure they are clean and tight, have not gotten hot and started rusting. Also check the voltage on the solenoid wire, (smallest) wire from the start button. In some cases there is a voltage loss on this wire. Next time it will not engage the starter right away, make a jump from the main power battery terminal on the starter to the solenoid wire. If it starts right up every time, you need to add and wire in another relay to carry the voltage to the solenoid from the start button, (a relay to work the solenoid, lol). If that test does not work or help.. Tap on the starter motor with a hammer. if it catches and turns the engine then, the motor brushes are worn and need to be replaced.
first check battery for full charge 12.5 to 14 volts. second corroded battery cables can cause this symptom.third check connections to battery and starter and ground are clean and tight. fourth, click in small box maybe a malfunctioning starter relay- you can ask dealer if your bike has one. last possible starter failure.
If the clicking sound is coming from the engine bay, from the relay, you may want to have the starter itself checked out. You need to check if the ground cable from the engine to the chassis is secured. If that is OK, you may want to have the starter motor checked.