How d'ya remove the sparkplugs on an Eliminator

check the plug first and then the spark in the plugs if it is not ok then replace the cd unit with a new one or else fit the cd unit to another same starting vehicle to know if it is faulty.

Yes if it is leaking from the spokes that means that you need a new inner tube. Wheels with spokes are only supposed to use tubed tires. If you want to go tubeless there is a place in California that will seal the wheels for you. Look it up on Google, do a search for sealing rims with spokes.

I’m happy to help further over the phone at https://www.6ya.com/expert/al_e83b1941f9c0f302

hi have you checked if you are getting 12v dc to ignition switch from the battery?

Turn the throttle screw and the air screw inward until they LIGHTLY seat. Now turn each adjuster one and one half turns outward. This is the factory setting. If you actually tighten them down at all, you will create a "ring" on the adjuster and it may affect performance. Please rate my answer. Thanks!

no the engine mounting area is totally different

hola como puedo saber cual es el problema con mi 96 grancheerokie cada vez que acelero despues de 1500 rpm el motor pierde fuerza y avienta explociones por el throurolbody ya cambie los sparkplugs,cables, rotor, cap y el motor ya esta a tiempo [email protected]

Here you are. Rate me?
http://www.myxmanuals.com/modules.php?name=Downloads&d_op=getit&lid=820

On an '89, remove both side covers and you will see a bolt on both sides of the bike just under the seat. Remove the bolts, lift the back of the seat and slide toward the rear of the bike.