Have a fzr 1988 yamaha 1000 carbs are cleaned, float levels are set to right height, starts up but batle flat throttle and doesn't want to rev up hangs for a while then cuts out as soon as it starts coming out of flooding
SOURCE: oil change on my 1990 fzr yamaha 1000
20/50 shouold be fine oil drain plug is under the belly pan
SOURCE: flaot setting for 81 yamaha 650 maxim (4 ea.)
# 1carb left 0.04+or-0.04 inches mm 1.0+or-1.0 # 2 carb right 0.08+or-0.04 2.0+or-1.0 hope this gets you there
SOURCE: yamaha dtr carb diagram
If the floats are sticking then bang the side of the carb gently with a hammer handle to dislodge them
Ride Safe
Bike-doc
Please mark this as useful (if it has been!!)
SOURCE: Yamaha SR185 1981 carb settings
Righhttt And I need some new brain cells, stock jet size is .075 float level in 17/64ths turn adjustnebt screws in till they bottom out lightly then turn one and a half turns out andthat should get it to run, otherwise go to the nearest library and check out the book for that modle. there is another adjustment for the venturi plates but don't remember the exact proceedure.
SOURCE: KDX200 carb float set up. Hi I have gas coming
my 1998 KDX200 is acting like it isnt getting gas what do i do ?
67 views
Usually answered in minutes!
×