Question about kawasaki Motorcycles

2 Answers

I have a 2002 Kawasaki KZ1000 Police motorcycle. I'm having trouble reinstalling the fuel tank. There are four hose connections on the bottom of the fuel tank. Not sure where they all go. @

Posted by Chris Ropski on

Ad

2 Answers

Gregg Mahin

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • kawasaki Master
  • 64,523 Answers

Hi, Chris for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?sxsrf=ALeKk01oadl8-gUD8Xiva1ybiL3iEV2Vgg:1591129757722&source=univ&tbm=isch&q=2002+Kawasaki+KZ1000+fuel+and+vacuum+line+routing&sa=X&ved=2ahUKEwjlh4Cg_OPpAhUuh-AKHaUVCaoQsAR6BAgJEAE&biw=1440&bih=757
https://www.kawasakimotorcycle.org/threads/kz-1000-fuel-lines-routing.70135/
http://www.policemotorunits.com/files/84003917.pdf
https://www.partsfish.com/page/oem-parts-for-kawasaki
https://www.manualslib.com/manual/1102933/Kawasaki-Kz1100.html

Posted on Jun 02, 2020

Ad

ray gallant

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • kawasaki Master
  • 68,648 Answers

NEVER HEARD OF TAKING A PICTURE BEFORE REMOVAL I ASSUME

Posted on May 23, 2020

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Exploded view of turn signal switch pin connector on a 2000 kz1000


Hi, John for more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Kawasaki KZ1100 Service Manual
OEM Parts for Kawasaki
Kawasaki KZ1000R Owner Manual
KZ1000 Police Specs eHow
Kawasaki Kz1000

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

May 03, 2017 | Motorcycles

1 Answer

Changing coils on a 91 Kawasaki KZ1000 police issue...we knew that we connect the 1&4 plugs, and the 2&3...which are which though?


Hi Melanie the left coil goes to 1+4 the right to 2+3 you will need to experiment with the coil wires there usually are two on each coil there should be two the same colour connect one to each coil. Then connect the others if it doesn't start swop them around and try again. Regards Jim...

May 31, 2015 | kawasaki Motorcycles

1 Answer

2002 Kawasaki VN 1500 Vulcan Meanstreak will not start


Hi, Anonymous and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the choke.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. Fuel injectors stuck open.
13. Quick disconnect check ball stuck.
14. Compression below 75 PSI.
15. A stuck-bent-burnt valve.
16. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
17. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
18. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
19. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections are loose or connected to the wrong cylinders.
20. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
21. Faulty neutral, clutch, kickstand safety switch.
22. Faulty fuel pump or fuse or relay.
23. Faulty or corroded run/stop switch.
24. Tilt sensor needs a reset.
25. Security system not disarming alarm needs a reset.
26. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Mean Streak wont start HELP Kawasaki Vulcan Forum Vulcan Forums
03 Mean Streak Won start KawiForums Kawasaki Motorcycle Forums
Kawasaki VN1500 MEAN STREAK Service Manual
OEM Parts for Kawasaki
2002 Kawasaki Vulcan 1500 Mean Streak Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Feb 02, 2014 | 2002 kawasaki VN 1500 Vulcan Meanstreak

1 Answer

Kawasaki KZ1000 fuel line routing


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Kawasaki KZ1000 fuel line routing Google Search
https://www.kawasakimotorcycle.org/forum/mechanics-corner/70135-kz-1000-fuel-lines-routing.html
Kawasaki KZ1100 Service Manual
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Aug 20, 2012 | kawasaki Motorcycles

1 Answer

1982 Kawasaki KZ 1000 replace the front fork seals


Hi, Douglas for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://kzrider.com/forum/5-chassis/138890-kz1000-fork-seal-replacement
Fork Seal Replacement Conventional Motorcycle How To Kawasaki 454 EN450
Kawasaki KZ1100 Service Manual
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Apr 25, 2012 | kawasaki Motorcycles

1 Answer

1980 Kawasaki Kz1000 Classic will not start


Hi, Steve and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the choke.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. Fuel injectors stuck open.
13. Quick disconnect check ball stuck.
14. Compression below 75 PSI.
15. A stuck-bent-burnt valve.
16. Improper valve clearance (too tight)
17. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
18. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
19. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
20. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections are loose or connected to the wrong cylinders.
21. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
22. Faulty neutral, clutch, kickstand safety switch.
23. Faulty fuel pump or fuse or relay.
24. Faulty or corroded run/stop switch.
25. Tilt sensor needs a reset.
26. Security system not disarming alarm needs a reset.
27. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://kzrider.com/forum/4-electrical/475964-1980-kz1000-classic-bike-does-not-run
3 Things to Look for When Your Motorcycle Won Start The Allstate Blog
Kawasaki KZ1100 Service Manual
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Jan 09, 2012 | kawasaki Motorcycles

1 Answer

Where is the vin number located on a kawaaski kz1000 police


Most VIN numbers have to be stamped on the frame by the triple tree, left side or right side. Basically right in front of the fuel tank but will be readable without removing the tank. It will read up and down and will be 17 digits long. Depending on how old the bike is it might be on the bottom frame close to the engine but will also be stamped into the frame. Let me know what you find and I can give you another place to check, Daniel.

Nov 18, 2011 | kawasaki Motorcycles

1 Answer

2000 Kawasaki KZ1000 firing order


Hi, Ninamg7829 for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Firing order number vs cylinder number
https://kzrider.com/forum/4-electrical/378185-82-kz1000-firing-order
Kawasaki KZ1100 Service Manual
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Sep 16, 2011 | kawasaki Motorcycles

1 Answer

2002 Kawasaki VN 1500 Vulcan Classic will not start


Hi, Richard and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the choke.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. Fuel injectors stuck open.
13. Quick disconnect check ball stuck.
14. Compression below 75 PSI.
15. A stuck-bent-burnt valve.
16. Improper valve clearance (too tight)
17. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
18. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
19. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
20. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections are loose or connected to the wrong cylinders.
21. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
22. Faulty neutral, clutch, kickstand safety switch.
23. Faulty fuel pump or fuse or relay.
24. Faulty or corroded run/stop switch.
25. Tilt sensor needs a reset.
26. Security system not disarming alarm needs a reset.
27. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://tearitupfixitrepeat.blogspot.com/2010/08/if-your-1500-vulcan-wont-start.html
http://www.kawasakimotorcycle.org/forum/kawasaki-cruisers/95808-05-kawasaki-1500-vulcan-classic-wont-start.html Kawasaki Vulcan 1500 Classic Fi Service Manual
OEM Parts for Kawasaki
2002 Kawasaki Vulcan 1500 Classic Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Sep 12, 2011 | 2002 kawasaki VN 1500 Vulcan Classic

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6437 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...