Question about kawasaki Motorcycles
Hi, Terrance and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting/leaking, spark plug cable connections loose check for spark leakage in the dark.
6. A faulty ignition coil or electronic control module.
7. Faulty pulse coil.
8. Faulty CKP, CMP, or BAS sensor.
9. Faulty ignition switch.
10. Faulty run/off switch
11. Tilt sensor needs a reset.
12. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Posted on Mar 09, 2020
Posted on Mar 08, 2020
Tips for a great answer:
Nov 06, 2016 | kawasaki Motorcycles
Nov 06, 2016 | kawasaki VN 1500 Vulcan Classic...
Apr 21, 2014 | 1998 kawasaki VN 1500 Vulcan Classic...
Dec 04, 2013 | 2000 kawasaki VN 1500 Vulcan Drifter
Aug 06, 2013 | 2001 kawasaki VN 1500 Vulcan Classic...
Feb 17, 2013 | 2002 kawasaki VN 1500 Vulcan Drifter
Sep 20, 2011 | 2001 kawasaki VN 1500 Vulcan Classic
Jul 22, 2010 | 1999 kawasaki VN 1500 Vulcan Classic
Jul 09, 2009 | 2001 kawasaki VN 1500 Vulcan Classic...
Mar 17, 2009 | 1999 kawasaki VN 1500 Vulcan Classic
74 people viewed this question
Usually answered in minutes!