Question about Ultra Motorcycles
Not too hard - Undo the two bolts on the caliper and then seperate the caliper and pull the old ones out. Insert the new ones and put the bolts back in to hold the caliper back together and then install them back on the bike with the two retaining bolts. Use a bit of lock tight (Blue) on the threads. Warning do not let anyone apply pressure on the brakes while you have them off the bike or you will have a mess and/or a problem.
Posted on Jun 21, 2009
HD = Hundred Dollars, voltage regulator.
Stator replacement = big dollars because labor intensive. The part is around $100, maybe more by now
Posted on May 17, 2010
The oil pan is on the bottom of the transmission. Look under the transmission and you'll see two drain plugs. The one closest to the front left corner is the engine oil drain. The one closest to the center is the transmission drain.
Posted on Jul 25, 2010
Testimonial: "Thank you so much for your expert help. I am a new Harley owner and just needed a quick help to my problem. Thanks again. David Rieger"
30 psi in the front and 36 in the rear for single rider. Two up riding, raise the rear tire to 40 psi.
Good Luck and Ride Safe
Posted on Aug 16, 2010
Tips for a great answer:
Nov 21, 2017 | 2011 Harley Davidson FLHTCU Ultra Classic...
Feb 08, 2011 | 2000 Harley Davidson FLHTCUI Electra Glide...
Nov 02, 2009 | 2000 Harley Davidson FLHTCUI Electra Glide...
Jul 27, 2009 | 2000 Harley Davidson FLHTCUI Electra Glide...
Feb 28, 2009 | 2005 Harley Davidson FLHTCUI Electra Glide...
Feb 15, 2009 | 2000 Harley Davidson FLHTCUI Electra Glide...
467 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: