Question about 2012 Kymco Super 8 50 2T
Hi, Todd parts swapping is common with most motorcycles when it comes to interchangeable or compatible parts from one model with another "EXCEPT" for the CDI's they are year-make-model "SPECIFIC" the best thing to do is call your local Dealership Parts Department or a reputable independent shop. If your location is not near a shop then go online and find a parts catalogue or "FICHE" and match part numbers depending on your criteria.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Posted on Sep 23, 2019
most likely the problem is the switch places onto the shaft of the valve. to replace the switch, you would need to remove the burner cap and port rings. you will see a large brass nut that needs to be removed on all 4 or 5 burners. next you would need to remove the nut in the center of the simmer port ring which is also the venturi for the main burner. you must be careful when removing this nut as they have a tendancy to lock onto the jet holder and could be hard to remove (don't strip or break the venturi or holder).....after you remove those nuts, the burners and top can be removed (watch the igniter wires). you can remove the switch by removing the retainer clip that holds the switch onto the valvestem.
Posted on May 28, 2009
My 95 mercury sable drives a while then splutters and dies. after it sits a while it starts. It only seems to do this whem its hot outside and has run a while
Posted on Jun 21, 2010
Tips for a great answer:
Sep 16, 2018 | 1995 Honda CB 250 Nighthawk
Jun 28, 2018 | 2006 Kymco ZX 50
Sep 06, 2017 | 2006 Kymco People S 50
May 25, 2017 | 2009 Kymco People S 50
Jun 05, 2016 | Kymco Motorcycles
Aug 24, 2015 | Motorcycles
Jun 19, 2015 | Kymco Motorcycles
Oct 05, 2013 | 2006 Suzuki GSX 600 F (Katana)
Nov 16, 2012 | 2008 Kymco Super 8
39 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: