Question about Kymco Motorcycles

Open Question

Remove the shock absorber Kymco motor scooter

How to remove the shock absorber from the fork of kymco mc scooter @

Posted by Renato Bola on

Ad

5 Related Answers

Anonymous

  • 65 Answers

SOURCE: Kawasaki KLE 500 B6F rear shock absorber

hagon shocks will more than likely be the people to contact ww.hagon-shocks.co.uk
a very good British manufacturer
good luck ian

Posted on Dec 31, 2008

Ad
mx5turbo92

mx5turbo92

  • 545 Answers

SOURCE: remove/replace shock absorber assembly 900s 1995 saab

  1. Slightly loosen hub center nut when all four wheels are on ground.
  2. Raise and support vehicle, then remove five wheel bolts and wheel.
  3. Remove hub center nut, then the wheel sensor,
  4. Press back brake piston using slip-joint pliers,
  5. Remove caliper from steering swivel member, then suspend in wheel housing with cable tie.
  6. Remove brake disc and back plate, then slightly loosen tie rod end nut.
  7. Press out tie rod end nut using puller tool or equivalent.
  8. Remove nut and tie rod end bolt, then the anti-roll bar to swinging arm nut.
  9. Remove outer ball joint nut.
  10. Press ball joint out of steering swivel member using puller tool or equivalent, installed on spring link.
  11. Remove nut and discard. This self-locking nut must not be reused.
  12. Remove three upper mounting nuts for MacPherson strut, then the strut.
  13. Clamp MacPherson strut in vice.
  14. Compress spring using spring compressor or equivalents.
  15. Hold piston rod and remove nut using MacPherson strut socket tool 89 96 662, or equivalent. This is a self-locking nut and must not be reused.
  16. Remove mounting and top spring seat, then the coil spring, gaiter and compression stop.
  17. Unscrew damper using wrench tool No. 89 96 670, or equivalent, then remove damper from strut.
  18. Reverse procedure to install, noting the following:
    1. Screw damper in place using wrench tool No. 89 96 670, or equivalent.
    2. Lower end of coil spring should abut against stop in bottom of spring cup.
    3. Position MacPherson strut on vehicle and install three retaining nuts on top mounting. Tighten nuts alternately, according to specifications.
    4. Always use new hub center nut with self-locking threads.

Posted on Jun 04, 2009

Ad

Anonymous

  • 1 Answer

SOURCE: my 2005 50cc kymco cobra racer scooter does not start

i have fire and new cdi ran find for 2 days but hard to start now it will not start

Posted on Mar 26, 2011

67gtojake

  • 84 Answers

SOURCE: looks like the forks/shocks are

I am 99.99999999% sure that it is on the right way, but if you really think it's backwards take it to a bike shop. They can tell you if it is backwards and if it is fix it.

Posted on Aug 08, 2011

gewiz

Rob Hill

  • 1414 Answers

SOURCE: What does error message number 9 mean on my kymco mini s mobility scooter?

hi, it's a controller trip error message this can mean a bad connection or at worse a controller fault ...

Regards
Rob

Posted on May 05, 2014

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...
Motorcycles Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kymco Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6487 Answers

Are you a Kymco Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...