Question about Motorcycles
Cylinder not firing. Remove plug and verify spark. Also verify fuel to cylinder.
Posted on Oct 03, 2019
impeller is made of plastic on teh water pump and its slipping and spinning on the shaft renew before weather warms up as engine will overheat
Posted on Jan 01, 2009
you have a vacuum loss to the ac control head, the motors that divert air are vacuum operated, if you loose vacuum the system goes to defrost for safety reasons, the vacuum comes from the engine, then goes o a plastic vacuum tank under the hook start there, it is a 3/16 id hose.
Posted on Aug 14, 2009
With your front heat working the most likely cause for the rear heat not to work is that there is an obstruction in the line that is preventing the warm coolant to get to the rear heater core or the rear heater core itself is plugged and not circulating. Another possible cause could be low coolant level where the system has enough coolant to provide the front system with enought warm coolant but not the rear system. Hope this helps
Posted on Dec 30, 2009
First, check your engine coolant level. If it is low, you need to find out why. If the coolant level in the radiator is full, it could be many things including a bad thermostat, a clogged heater core, or a broken or damaged air temperature door or actuator.
Posted on Jan 22, 2011
Testimonial: "Very solid answer of what is wrong, which is what I asked."
Tips for a great answer:
Jan 18, 2011 | 2004 Yamaha V Star Classic
Jul 02, 2009 | 2001 Yamaha V Star 1100 Classic
Jun 12, 2009 | 2000 Yamaha V Star Custom
89 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: