Question about 2001 kawasaki ZX-6R Ninja

1 Answer

TRYING TO INSTALL A AUTO START ALARM ON MY 2000 KAWASAKI ZX-6 I CAN GET IT TO SPIN OVER DASH LIGHTS UP JUST WONT START IF I TURN THE KEY ON AND THEN TRY TO START WITH THE ALARM IT STILL WONT START I NEED A BIKE WIRE DIAGRAM JUST CANT FIND ONE ONLINE

Posted by samsmalibu on

Ad

1 Answer

mark woodring

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 496 Answers

Do you hear your fuel pump come on when you try it with your key fob

Posted on Jan 23, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi.month ago i install spy 5000 alarm.now the problem is ...cant start the bike because the alarm goes off always


Hi, Georgian read the manual provided in the link below you may need to do an alarm reset for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day
spy 5000m remote start problems ninjette org
How wired my spy 5000m to 2005 kawasaki zx10r
spy5000 alarm manual pdf
2008 2010 Kawasaki Ninja ZX 10R Service Manual Moto Data Project FREE!!!!!!

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Jun 17, 2016 | 2010 kawasaki Ninja ZX 10R

2 Answers

Took off meta alarm now wont start


Is a Meta Alarm to prevent theft? ... Seems it is working. If it is your machine - put it back on. If it is someone else's machine ... well, maybe you should return it to the owner and tell them you are sorry.

Dec 09, 2013 | 2005 kawasaki ZX-10R

1 Answer

2000 Kawasaki ZX-6R Ninja will not turn over


Hi, Mike before testing any electrical component in the Starting Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Engine Run Switch is "FAULTY" or corroded.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
5. Bank angle sensor needs a reset or is faulty.
6. FOB battery low or dead.
7. Faulty ignition switch.
8. Faulty starter button.
9. Faulty kickstand, clutch, neutral safety switch.
10. Security alarm needs a reset.
11. Starter relay, solenoid, starter motor or circuit wiring faulty.
12. Starter armature or field coils have failed.
13. Main fuse or circuit breaker may be blown or faulty.
14. Faulty ignition relay.
15. The electric starter is working but starter clutch has failed.
16. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
98 zx6r won start turn over nothing KawiForums Kawasaki Motorcycle Forums
2003 ZX6R Won Start 1 Engine Won Turn Over
Kawasaki Ninja ZX 6R Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Feb 25, 2013 | 2000 kawasaki ZX-6R Ninja

1 Answer

2008 Kawasaki Ninja ZX10R how to fix the alarm


Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing and printing please click on the blue links below. Good luck and have a wonderful day.
FI Dash alarm Kawasaki ZX 10R net
Kawasaki Fault Codes
2008 2010 Kawasaki Ninja ZX 10R Service Manual Moto Data Project
OEM Parts for Kawasaki
2008 Kawasaki Ninja ZX 10R Owner Manual

Feb 01, 2013 | 2008 kawasaki Ninja ZX10R

1 Answer

2001 Kawasaki ZX-12R will not turn over


Hi, Gsf1200s before testing any electrical component in the Starting Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Engine Run Switch is "FAULTY" or corroded.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
5. Bank angle sensor needs a reset or is faulty.
6. FOB battery low or dead.
7. Faulty ignition switch.
8. Faulty starter button.
9. Faulty kickstand, clutch, neutral safety switch.
10. Security alarm needs a reset.
11. Starter relay, solenoid, starter motor or circuit wiring faulty.
12. Starter armature or field coils have failed.
13. Main fuse or circuit breaker may be blown or faulty.
14. Faulty ignition relay.
15. The electric starter is working but starter clutch has failed.
16. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
ZX12R wont turn over Kawasaki Forum KawasakiWorld com 2003 ZX6R Won Start 1 Engine Won Turn Over
Kawasaki Ninja ZX 12R Service Manual
OEM Parts for Kawasaki
2001 Kawasaki Ninja ZX 12R Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Jun 12, 2011 | 2001 kawasaki ZX-12R

1 Answer

1998 Kawasaki ZX-9 R Ninja will not turn over


Hi, Jonpage66 before testing any electrical component in the Starting System it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
4. Bank angle sensor needs a reset or is faulty.
5. FOB battery low or dead.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand, clutch, neutral safety switch.
9. Security alarm needs a reset.
10. Starter relay, solenoid, starter motor or circuit wiring faulty.
11. Starter armature or field coils have failed.
12. Main fuse or circuit breaker may be blown or faulty.
13. Faulty ignition relay.
14. The electric starter is working but starter clutch has failed.
15. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.visordown.com/forum/workshop/1998-zx9r-wont-start
https://www.zxforums.com/forums/mechanical-technical/28041-zx9r-wont-start-strange-problem.html
KAWASAKI ZX900 C1 Service Manual
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Feb 18, 2011 | 2000 kawasaki ZX-9 R Ninja

1 Answer

2000 Kawasaki ZX-9 R Ninja how do I install the front indicators


Hi, R_basele for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How to install turn signal on Kawasaki Ninja
ZX6R Right Fairing Removal Turn Signal Installation
KAWASAKI ZX900 C1 Service Manual
OEM Parts for Kawasaki
Download Manual 2000 Kawasaki Ninja ZX 9R Owner Manual

Aug 16, 2010 | 2000 kawasaki ZX-9 R Ninja

1 Answer

Vw jetta wont let me start it


It's an ignition problem. If you keep trying to turn over it will start. It's an anti theft device they installed. The little car with the flashing key. Someone likely tampered with your ignition before for this to happen.

Feb 07, 2009 | 2000 Volkswagen Jetta TDI

Not finding what you are looking for?
2001 kawasaki ZX-6R Ninja Logo

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6453 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...