Question about 2001 Harley Davidson FLHR - FLHRCI Road king
2001 road king no spark no codes new coil all fuses are good @
Hi, Greg love that first name and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at the ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting/leaking, spark plug cable connections loose check for spark leakage in the dark.
6. Faulty ignition coil or electronic control module.
7. Faulty pulse coil.
8. Faulty CKP, CMP, or BAS sensor.
9. Faulty ignition switch.
10. Faulty run/off switch
11. Tilt sensor needs a reset.
12. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at [email protected] Good luck and have a wonderful day.
2001 Harley Touring Service Manual pdf
Motorcycle Maintenance Services Harley Davidson USA
Instant Repair Help over the Phone To speak to me personally $6
Posted on Jul 16, 2019
The compensating sprocket has regular threads and will loosen left and tight right. The clutch nut has reverse threads and loosens to the right ..... I've done this procedure several times and if u have any other questions, dont hesitate to ask - good luck
Posted on Mar 18, 2009
SOURCE: 2001 H-D Road King engine knock
For valve train noise try these:
1. Low oil pressure caused by oil feed pump not functioning
properly or oil passages obstructed.
2. Faulty hydraulic lifter(s).
3. Bent push rod(s).
4. Incorrect push rod length.
5. Rocker arm binding on shaft.
6. Valve sticking in guide.
7. Chain tensioning spring or shoe worn.
8. Cam(s), cam gear(s) or cam bushing(s) worn.
9. Cam timing incorrect.
If it is a bottom end knock, an engine tear down may be in order.
Posted on Jun 06, 2009
The same thing just happen to me and a friend of mine on our 2001 Road Kings. I am 95% sure your problem is the crank position sensor. We replace ours and the bikes are back to their glory.
Posted on Sep 12, 2009
Tips for a great answer:
Dec 27, 2012 | 2001 Harley Davidson FLHR - FLHRCI Road...
Aug 23, 2012 | 2001 Harley Davidson FLHR - FLHRCI Road...
Jun 16, 2012 | 2001 Harley Davidson FLHR - FLHRCI Road...
May 19, 2012 | 2001 Harley Davidson FLHR - FLHRCI Road...
Feb 04, 2012 | 2001 Harley Davidson FLHR - FLHRCI Road...
Jul 17, 2010 | 2002 Harley Davidson FLHR - FLHRCI Road...
Jun 13, 2010 | 2001 Harley Davidson FLHR - FLHRCI Road...
May 31, 2010 | 2002 Harley Davidson FLHR - FLHRCI Road...
May 26, 2010 | 2002 Harley Davidson FLHR - FLHRCI Road...
May 19, 2009 | 2002 Harley Davidson FLHR - FLHRCI Road...
80 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: