Question about Motorcycles
SOURCE: adjust clutch cable
If you have a stock cable you need a 9/16 and a 1/2 in. wrench. about 1/2 way downn the cable there is a rubber boot. pull the rubber boot over the adjustment. Loosen the liock nut and adjust the cable so you have aprox 1/8 to 1/16 in. slack in the handle. Re tighten the lock nut and pull the rubber back over the adjustment.
Posted on Nov 10, 2008
Oil change without filter 3.5 quarts
Oil change with flter change 4.0 quarts.
Primary 1 quart.
Transmission 20-24 oz.
Very important check your fluid levels afterwards refilling to make sure you have correct level of fluids. Hope this helps.
Posted on Aug 15, 2009
SOURCE: clutch is out
sounds like you want someone to give you a book thats about what it would take to give you what you requested but tell me if you wont buy a book what makes you think your ready to go into a tranny?
Posted on Dec 31, 2009
HD = Hundred Dollars, voltage regulator.
Stator replacement = big dollars because labor intensive. The part is around $100, maybe more by now
Posted on May 17, 2010
I'd say that you have an intermittant short somewhere. These are very difficult to find. I'd start at the tail light assembly as most of the time, I've found the shorts in that area, from the seat back to the tail light assembly.
Posted on Jun 04, 2010
Tips for a great answer:
Apr 08, 2014 | 2002 Harley Davidson FLHTCUI Electra Glide...
50 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: