2002 Yamaha YZF-R1 Logo

Related Topics:

Posted on Aug 14, 2009

2002 R1 stalls at idle

My 2002 R1 stalls on idle.It will idle for a few seconds then suddenly stop when the engine has warmed up.

5 Related Answers

Anonymous

  • 29 Answers
  • Posted on Dec 25, 2008

SOURCE: misses at cruizing speeds when engine gets warm. accels ok

Sounds like drumbanger is on the right track. If this bike ran ok in the past and you have not made exhaust or intake changes, the low speed jet may be partially plugged or you have developed an intake air leak. If this problem has always been there or you have changed something, consider going up a size or 2 on the low speed jet.

Ad

Anonymous

  • 5 Answers
  • Posted on Apr 25, 2009

SOURCE: Stalling

Does it drop so low it stalls? How does the air filter look? How many miles on it?




czaa

Arnie Burke

  • 7339 Answers
  • Posted on Aug 04, 2009

SOURCE: Engine cuts out with clutch engaged.

is your bjke water cooled could have aproblem with that-its gettin hot-if air cooled carb may neede cleaning. the clutch is ok but indicates to me that that carb needs a low speed jet adjust also-do u have a clymer manual!!

Anonymous

  • 1167 Answers
  • Posted on Sep 24, 2009

SOURCE: 2006 kawasaki 750 vulcan will not idle , will idle with choke

ok buddy on the carb will be some sort of screw and idle screw turn this in 1/4 of a turn with the machine running until it idles at 1000rpm also the choke will stall the engine when warm the choke is only for cold starts get back to me more info or problems f4d68ca.jpg

Anonymous

  • 8 Answers
  • Posted on Nov 01, 2010

SOURCE: r1 been sitting around for about a year ,starting

change fuel, change filter, if still happens get professional to check idle .

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2002 hyundai accent stops running after warming up

I recently tried the DIY service and repair manuals from a website and it actually helped me repair transmission problem in my jcb 3cx site-master. It would'nt move forward or reverse, engine was good both solenoids for forward and reverse worked, but still couldn't diagnose the problem.
I don't have much technical knowledge but I just followed it step-wise, and now it works perfect! covers wiring, codes, diagrams, torque specs, PCV, everything
got it from www.reliable-store.com
0helpful
1answer

2002 yamaha r1 it starts and runs great but idles at 3000 rpm when it gets warm

I have this problem on my 1998 r1 did you solve the problem?
0helpful
2answers

My R1 can not idling at 1000-3000rpm ??? Why ????

do othe rr1,s idle this low? the r1 is a highly tuned engined and as such do not likelow tickovers
1helpful
1answer

02 honda crv after warming up it shuts down at a stop

Here is the most common cause of surges and stalls and low idle, it is the idle speed control air-bypass valve and throttle valve, they get full of gunk over the miles and cause idle issues (stalls) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.
0helpful
1answer

Low idle

Here is the most common cause of surges and stalls and low idle rough idle, it is the idle speed control air-bypass valve and throttle valve (IAC for short), they get full of gunk over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.
1helpful
1answer

2002 sequioa sudden stall

Often when the battery is disconnected or replaced the computer will lose it's learned idle settings. You could try letting the engine idle in park until the engine temperature comes up to normal and leave it like that for a few minutes, then put the Air con on and let it idle again for a few minutes, then switch the air con off and put it into drive. If it does not stall, let it idle in drive for 2 minutes or so, and then do the same with the Air con on. This should relearn the base idle settings and stop it from stalling on you. Before you carry out this procedure you should make sure that when you replaced the battery you didn't remove any other plugs or knocked anything that may be causing the fault. If you try this procedure and it still stall when you select drive, you will need to get a Mechanic to check the vehicle over.

Hope this helps,
Mark.
Not finding what you are looking for?

749 views

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

littlewheel

Level 2 Expert

122 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...