Question about Honda Motorcycles

Open Question

I have a honda vtr 250 2000 model. When ignition switch is pressed it makes a single click noise but will not turn over

Posted by Graham Brown on


5 Related Answers


  • 55 Answers

SOURCE: Starter makes a ''clicking noise'' and doesn't turn over bike

batteries dead or dosn't have enough volts.try taking a jumper box and hooking it up if that dosn't work.then i would say its your starter silinoid.

Posted on Nov 23, 2008



  • 13 Answers

SOURCE: Gas stove ignator makes

sounds like you got the electronic ignitor valves wet try blowing them out with air or don't use for a few hours

Posted on May 27, 2009



  • 142 Answers

SOURCE: turn ignition key and only hear a single click

starter, or starter solenoid

Posted on Sep 22, 2009


  • 36 Answers

SOURCE: hi my samsung lcd tv model le40s8, it won't switch on

if you can do soldering work, replace two 1000uF10v bulging capacitor with 1000uF 16v or 25v in powersupply board. you will save $200.

Posted on Nov 12, 2009


  • 288 Answers

SOURCE: clicking sound when i press the gas pedal

The clicking and popping sound like a problem with the CV joints. The best repair for this is to replace the CV half-shafts. The brake noise may or may not be related to this issue. If the noise is coming from the front, it could be that you need new brake pads, or that the rotors need to be resurfaced, or the brakes may need some other adjustment. If the noise is coming from the rear, you may need new brake shoes, or the drums need to be resurfaced, or there could be another issue. Have the brakes checked out when the CV axles are replaced.

If you need more help with these issues or if you have any more questions just let me know.

Posted on Mar 30, 2010

Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2001 Honda VTR 250 broken ignition switch

get a pineapple slice it up,pour malibu over it in a glass with ice and enjoy. dave

Jan 30, 2013 | 2005 Honda VTR 250

1 Answer

Where can I buy a new ignition switch to replace the ignition on a stolen/revcovered VTR 2003?

any honda dealer shoud be able to provide you with a new ignition barrel wich is cheaper than a complete switch & provideing the mongrels who knocked it of didnt hack the wireing loom to bits somewhat easier to install you might also want to check with your local locksmith before going to the dealership he may be able to repair & rekey the exsisting switch however if you do have to replace the switch as a complete unit the electrical conection is not to daunting from memory its multiplug conection so diference in colour code wont be a problem

Mar 02, 2010 | 2003 Honda VTR 1000 F Firestorm

1 Answer

My 88 vtr 250 makes one loud CLICK noise when i try to start the bike coming from the starter relay i bought a used one from ebay but same result ideas?

Start with making sure the battery terminals are clean. Then make sure the battery is fully charged. When that is in place try again, even if you jump it to another bike. Follow where the click is actually coming from, is it the relay or is it from the starter motor. Your problem is 98% caused but either a battery that is had it, (not holding charge) or a dicky starter motor. Having a manual will not go astray, I couldn't find one to suit your model, but you are welcome to fossick around. They are freebies:

Jan 27, 2010 | 1997 Honda VTR 250

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6523 Answers


Level 3 Expert

85239 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides