Question about Honda Motorcycles

Open Question

I have a 1983 honda nighthawk 650 i need a new or aftermarket starter where can i find one

Posted by Josh Goodwin on

Ad

5 Related Answers

DoubleClutch

Greg O'Day

  • 376 Answers

SOURCE: 1983 Honda Nighthawk 650 stopped starting

Sounds like the starter solenoid went bad. Turn the key on, Make sure it in N. Take a screwdriver and jump the terminals on the solenoid and see if it turns the starter over and starts the bike. If it does then the solenoid needs replaced.

Posted on Oct 01, 2009

Ad

Ronnie Miller

  • 85 Answers

SOURCE: looking for a motorcycle manual for a 1983 honda

Clymer makes one,$35.00.part no. M345,can purchase from most online motorcycle warehouses

Posted on Apr 07, 2010

Ad
heimlich

David Belcher

  • 1978 Answers

SOURCE: I purchased a 1983 Honda

On your 1983 CB750SC you will have to remove your side covers. Be careful to put a fingers on both sides of the side cover tabs (a finger on either side of the side cover pin) when pulling off the side covers . They can break off easily on this model. Locate the two bolts holding the back of the seat down and take them off with a 12mm socket. Lift the back of the seat, pull it towards the back of the bike, and lift it off. The battery is underneath the driver seat and lifts straight up.

Posted on Nov 07, 2010

Anonymous

  • 64 Answers

SOURCE: I need the fireing order

The proper firing order is:

1 - 3 - 4 - 2

Posted on May 01, 2011

burt lancaster

  • 5 Answers

SOURCE: 1982 honda nighthawk 650 replace fusible link

find fuseable linc and cut it out and splice in a new fuseable linc

Posted on Oct 08, 2012

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1983 Honda CB550 Nighthawk starter motor not working


Maybe the brushes inside the motor are worn too much.

Sep 02, 2018 | Honda Motorcycles

1 Answer

Need help adjusting the carburetors for a 1983 honda nighthawk 650 cb.


tighten first the air screw of your carburetor by turning the screw clockwise. then turn the screw counter clockwise by 3 full turns. readjust according to smoothness of engine idle could be plus minus turns

Sep 03, 2015 | Honda Motorcycles

2 Answers

Hi. I have a 1985 Gr 650 which is an australian version of the Tempter and I,m after an starter motor for it and I believe there there are other model Suzuki,s and Honda,s that will fit the GR 650. Could...


Get the make and model of the starter, ie Nippon Denso / Hitachi etc go online and do some detective work because most aftermarket sellers list all the fitments. Try ebay, suzuki owners forums, motorcycle swap meets junk sales etc.
I've just been online for a starter and see there are rebuild kits.

Mar 30, 2015 | 1983 Suzuki Tempter GR 650

1 Answer

1982 honda nighthawk 650 replace fusible link


find fuseable linc and cut it out and splice in a new fuseable linc

Oct 08, 2012 | Honda Motorcycles

1 Answer

Looking for a motorcycle manual for a 1983 honda cb 650 sc nighthawk so I can change my fork seals?


Clymer makes one,$35.00.part no. M345,can purchase from most online motorcycle warehouses

Apr 07, 2010 | 1984 Honda CB 700 SC Nighthawk

2 Answers

1983 Honda Nighthawk 650 stopped starting


Sounds like the starter solenoid went bad. Turn the key on, Make sure it in N. Take a screwdriver and jump the terminals on the solenoid and see if it turns the starter over and starts the bike. If it does then the solenoid needs replaced.

Oct 01, 2009 | 1993 Honda CB 750 Nighthawk

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6517 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...