Question about Motorcycles

1 Answer

Throttle cable How to hook up at carb

Posted by Keith Shaw on


1 Answer

Gregg Mahin

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.

  • Motorcycles Master
  • 61,842 Answers

Hi, Keith I would really love to help you with your motorcycle question but due to the magnitude of yesterday's solar flare the batteries in my crystal ball are dead and my mental telepathy headset circuitry was melted. I need the year, make, and model of your motorcycle please click on " Ask For More Information" directly below and provide this information in the box that will open and then click on the green "SEND" box in the bottom right-hand corner. Good luck and have a wonderful day.

Posted on Mar 17, 2020


3 Related Answers


  • 110 Answers

SOURCE: Trying to hook up a new throttle cable

There are many different linkage configurations. Go onto Briggs and and enter your exact nodel number and type number and it will give you a picture of the options

Posted on Nov 04, 2009


adam bikedoc

  • 695 Answers

SOURCE: Wear does the throttle cable hook to carb

It depends on what bike you have ,please elaborate.

Posted on Mar 06, 2015

Shane craig

  • 1 Answer

SOURCE: 1990 vulcan 750 throttle

Un hook. Ar

Posted on Apr 06, 2016

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Would just like some reference points to go from on adjusting the throttle cable to sync carbs up really close

You do not adjust the throttle cable, you adjust the idle speed hard stop screws with a carburetor manometer hooked up to the vacuum sync port on each carb.

Jan 23, 2017 | Motorcycles

1 Answer

How to replace control cable on a cub cadet

buy new cable the match it to old one throttle or chock cable you will have to remove breather then look how cables or mount reminder how there mounted unhook them if throttle cable you will have to remove carb 2 bolts are nuts loose carb twist it to remove throttle cable carb has to be almost off to twist it then remove cable at dash pull out replace cable with new one install in reverse order paying attenion how to hook up not straight forward you can do it

Aug 29, 2014 | Garden

1 Answer

Walbro carburetor diagrams

must be a small tiller to have a walbro carb on it most of these have a hole drilled in throttle cam ("D" looking thing on top) that the cable has a "L " hook that goes into it cable clamp must me loosed to allow a 45 degree entry of "L" hook into "D" plate

Jul 23, 2014 | Craftsman Garden

1 Answer

I need to hook up the fuel lines on a husqvarna mondo mega,also the throttle cable

There are three hoses on this machine, the main fuel tube from the tank with the fuel filter on the end, goes to the carb elbow nearest to the pump cover ( alluminium cover held with a single screw ) the pipe from the other elbow on the carb goes to the suction side of the primer bulb ( the shorter of the two connections on the back of the primer ) a pipe then goes from the longer conection on the primer back to the tank.
The throttle cable has a double alloy bend in the end, this just hooks into the larger hole in the throttle spindal.

May 08, 2012 | Garden

1 Answer

1975 Yamaha XS650B replace throttle cables

Hi, Zooyorkog07 for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "Free" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
how to install throttle cable
Yamaha XS650SE Shop Manual
OEM parts for Yamaha

Btw, I’m available to help over the phone in case u need at

Mar 18, 2011 | 1975 Yamaha XS 650 B

1 Answer

Throttle linkage wont reach new 4brl carb

Noadjustments can be made.Order the correct cables as needed through any GMparts dealership

Jun 05, 2010 | Chevrolet Impala Cars & Trucks

1 Answer

Trying to hook up a new throttle cable

There are many different linkage configurations. Go onto Briggs and and enter your exact nodel number and type number and it will give you a picture of the options

Oct 28, 2009 | Briggs Stratton 020273 Elite Series...

2 Answers

1990 vulcan 750 throttle

no spring in the grip!
id suspect the cables are binding up inside so disconnect at the carby end then & see if they are moving freely
Cheers Rob

Aug 16, 2009 | 1990 kawasaki VN 750 Vulcan

1 Answer

Starts ok wont pick up speed

check to see if the throttle cable is hooked up to the carb. look at the back of the motor and watch as you pull the the throttle to see if the cable is hooked up. if the cable looks to be working correctly then pull the spark plug up and heat it up with a blow torch and put it back in. if the motor runs good then you need a new spark plug. if those two things do not work then you need to replace the carb diapram and gaskets.

May 18, 2009 | Yard Machines Garden

1 Answer

Throttlc cable

Disassemble the handle. Remove the cable and pay attention to the HOOK in the carb throttle. Install the new cable in the exact location, positioning it in the handle properly. Check for proper operation before you reinstall the handle.

Sep 05, 2008 | Garden

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6334 Answers


Level 3 Expert

85239 Answers

richard libby

Level 2 Expert

209 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides