Question about 1996 kawasaki ZX-6R Ninja
My 1996 ninja zx 600 has no power to nothing new battery and new starter relay. the wire is good everywhere @
Hi, Anonymous before testing any electrical component in the Starting Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Engine Run Switch is "FAULTY" or corroded.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
5. Bank angle sensor needs a reset or is faulty.
6. FOB battery low or dead.
7. Faulty ignition switch.
8. Faulty starter button.
9. Faulty kickstand, clutch, neutral safety switch.
10. Security alarm needs a reset.
11. Starter relay, solenoid, starter motor or circuit wiring faulty.
12. Starter armature or field coils have failed.
13. Main fuse or circuit breaker may be blown or faulty.
14. Faulty ignition relay.
15. The electric starter is working but starter clutch has failed.
16. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
No electrical power on bike KawiForums Kawasaki Motorcycle Forums
Motorcycle won start No lights or anything Problem Solved
Kawasaki Ninja ZX 6R Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja ZX 6R Owner Manual
Posted on Feb 25, 2019
You can jump across the celonoid on the starter. If the engine turns over then your problem is either the celonoid or the starter switch.
Posted on Sep 28, 2008
SOURCE: wont start
There's only 2 more things that I can think of, check the fuse for the ignition, then the computor itself, you did everything else.It might be the problem and may not.
Posted on Jan 28, 2009
Check the Starter Solenoid mounted near the battery.Check it out in the dark...have someone try to start it and see if it sparks at the solenoid.connections may be loose.Also check/wiggle wiring harness to starter.
Posted on Apr 19, 2009
If you have a multimeter check the voltage across the starter when you press the starter button. If not try it with a 12v bulb this will tell you if you are getting any power.Try these then come back.
Posted on Jul 25, 2009
Tips for a great answer:
Sep 18, 2014 | 1999 kawasaki ZX-6R Ninja
Jul 20, 2014 | 1999 kawasaki ZX-9R Ninja
May 20, 2017 | 1999 kawasaki ZX-9R Ninja
Feb 25, 2013 | 2000 kawasaki ZX-6R Ninja
Mar 22, 2012 | 1996 kawasaki ZX-9R Ninja
Mar 14, 2012 | 1997 kawasaki ZX-9R Ninja
Mar 14, 2012 | 2006 kawasaki Ninja ZX10 R
Aug 08, 2010 | 1996 kawasaki ZX-7R
Mar 27, 2010 | 1997 kawasaki ZX-9R Ninja
Nov 16, 2009 | 2006 kawasaki ZX-6R
38 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: