Question about 2004 Suzuki RM-Z 250

1 Answer

My suzuki rmz 250 2004 was under the last week i have to use more kick to start it every day and now it wont start at all. Some times i shoot flames from the exhaust.

Posted by Anonymous on

Ad

1 Answer

preloved003

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 28 Answers

YOUR VALVE CLEARANCES NEED TO BE ADJUSTED BACK TO FACTORY SPECS...IN OTHER WORDS GET IT SERVICED AT A BIKE SHOP

Posted on Aug 06, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2005 rmz 250 wont kick start it will push start but when i give it fuel it boggs and dies just put it new plug and it made no difference, it has spark and compression and fresh gas...please help!!!


there are 3 things you can do

1. replace fuel filter
2. clean unclog fuel line
3. clean carb

heres a link to a complete tare down of the carb

http://www.suzukipartshouse.com/?gclid=CJSPxLWE66cCFQQ-bAodDCu_bQ#/Suzuki/RM-Z250_%282005%29/CARBURETOR

good lock.

Mar 26, 2011 | 2005 Suzuki RM-Z 250

2 Answers

Are there timing issues with the 2006 rmz 450? I replaced the valves, (bent from timing) cam timing chain, oil and oil filiter. When I try to start it it backfires but will start... Once it gets hot and...


have u tried turning the engine over slow for about three to four turns with the kick starter then kick it once or twice hard ..it should start...dont give it any throttle...floods easy

Oct 09, 2010 | 2005 Suzuki RM-Z 450

1 Answer

My rmz 250 wont start on the first kick when the choke is on but when the engine is on and hot it starts first kick with no choke?????????


It takes a little suction for the gas to reach the cylinder from the carb. When it is hot and on, the gas is readily available. So a kick or two, when cold starting is not abnormal. Alternatively, kick twice with the key in off position. Then turn the key on and kick, the engine will start instantly. Idea is the make the gas reach the inlet.

Feb 13, 2010 | 2004 Suzuki RM-Z 250

1 Answer

It wont start. sometimes it will bump start


when's the last time top end was rebuilt? could be piston rings are worn. also, make sure your power valve is clean.

Dec 13, 2009 | 2003 Suzuki RM 250

1 Answer

I have an 04 RMZ 250 I just re-shimmed the valves and put a new piston in and bike was running great started first kick road it all over the street and golf course. went on ONE ride in the heat and...


sounds like maybe valves were shimmed too tight,check service manual for clearances...better a little loose than too tight,can cause alot of damage to cam & head,be careful!!

Sep 29, 2009 | 2004 Suzuki RM-Z 250

3 Answers

Rmz 250 04 model wont idal or kick start


Like I told somebody earlier to day lower the octane rating of the gas you are using....repost if you need anything futher......

Jun 22, 2009 | 2005 Suzuki RM-Z 250

Not finding what you are looking for?
2004 Suzuki RM-Z 250 Logo

588 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6528 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...