Question about 2002 kawasaki ZX-12R
Please help me with my zx12 r.M model 2002 g B.L last days I put the wire harness from model 2001 zx12r but the connectors on ecu are not like on my ecu of 2002 g .what can I do. Thanks @
Hi, Tomislav you could try splicing the 2002 connector to the 2001 harness, for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Kawasaki Motorcycle Wiring Diagrams
Kawasaki NINJA ZX 12R Service Manual
OEM Parts for Kawasaki
Posted on Feb 20, 2019
Is it getting spark? remove one spark plug wire and put a spark plug in it, hold the body of the plug against an unpainted metal part of the engine or body with an insulated tool (like a plastic handled screwdriver) and get someone to wind the engine over. You should see spark at the plug. If not, check to see if the igniter module is switching the coil correctly (might want to search on the net for this procedure, too hard to explain here). Probly best to just replace the igniter module anyway with the age of the vehicle.
Posted on Oct 25, 2008
SOURCE: 2008 subaru outback
Best to pop in to your local Subaru dealer and ask them what is required for wiring in a trailer plug, a lot of new vehicle require special equipment to prevent damage to the electronics that control the lighting on the vehicles, especially those that have LED style lights on them. Get a quote from them on cost of them doing the job, and for the parts only if you want to get someone else with a cheaper labour rate to do it.
Hope this helps,
Posted on Nov 02, 2008
Here are the wires colors of the harness and what they do.
2001 Pontiac Grand Am Car Audio Wiring Diagram
Car Radio Battery Constant 12v+ Wire: Orange
Car Radio Accessory Switched 12v+ Wire: The radio harness does not provide a switched power source. Run a wire to the fusebox for switched power.
Car Radio Ground Wire: Black/White
Car Radio Illumination Wire: Gray
Car Stereo Dimmer Wire: Brown
Car Stereo Antenna Trigger Wire: N/A
Car Stereo Amp Trigger Wire: Pink
Car Stereo Amplifier Location: Mounted behind trim in the left side of the trunk.
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Tan
Left Front Speaker Negative Wire (-): Gray
Right Front Speaker Positive Wire (+): Light Green
Right Front Speaker Negative Wire (-): Dark Green
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Brown
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Dark Blue
Right Rear Speaker Negative Wire (-): Light Blue
Posted on May 30, 2009
You can try any Circuit City or any car stereo place or you can wire it yourself you just have to figure out which wire is power,ground,front and rear speakers. Yeah the hornance makes it easier but it can be done without it
Posted on Jul 02, 2009
Theres a standard amongst most stereos, so if these colors apply, then you will be right,
Red is Ignition power
orange is direct power
Black is earth
blue is for phone
White is for electric arial
then there will be four coloured wires with matching color trace wires, these are the speaker wires.
Hope this gets you going, good luck.
Posted on Jan 01, 2010
Tips for a great answer:
Jun 01, 2017 | 2000 kawasaki ZX-12R
Sep 05, 2014 | 2003 kawasaki ZX-12R
Mar 20, 2014 | 2002 kawasaki ZX-12R
Feb 17, 2014 | 2005 kawasaki ZX-12R
Aug 03, 2013 | 2003 kawasaki ZX-12R
Mar 31, 2012 | 2002 kawasaki ZX-12R
Oct 01, 2011 | 2000 kawasaki ZX-12R
Jun 12, 2011 | 2001 kawasaki ZX-12R
Oct 19, 2010 | 2002 kawasaki ZX-12R
Jan 31, 2010 | 2000 kawasaki ZX-12R
May 26, 2020 | Motorcycles
101 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: