Question about Suzuki Motorcycles

1 Answer

Im trying to put a suzuki vx 800 engine into my suzuki vs750 but wires are different coming out of emgine

Posted by garry marsh on


1 Answer

Simon Atkinson

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Suzuki Master
  • 1,900 Answers

As it is a vx engine going into a vs frame Suzuki may have used a different wiring harness to allow for differences in engine layout and the electronics fitted.
Is the engine the same age as the frame it's going into? Age differences can also affect the wiring layout.
You will need a wiring diagram for your bike and a separate one for the replacement engine. You will need the layout of the engine sensors as well.

Posted on Feb 18, 2019


3 Related Answers


  • 3567 Answers

SOURCE: Whats the spark plug gap on a vx 800 1990 suzuki

Set the gap at .030

Posted on Jul 24, 2009



  • 7 Answers

SOURCE: I need a new wiring loom for a 1989 Suzuki VS750

Steve's salvage in Georgia or jacks salvage in sanford florida.

Posted on Apr 19, 2010


Ed Nelson

  • 149 Answers

SOURCE: 800 volusia suzuki

You will have to remove the ignition with some security bits.

Posted on Nov 04, 2010

Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Flooding Carburetors,

Sounds like the carbs are gummed up,and the floats are stuck. The carbs will have to come off,be thoroughly cleaned,and the float levels reset,and synchronized.

Aug 29, 2012 | 1991 Suzuki VX 800

1 Answer

What is the correct neele clip groove on a 1992 vx 800? Vin V551B104280 Eng No 104344. Many thanks Bill Marsh

Put the clip in the middle. If the bike tends to show a hesitation when starting out from a stop. move the clip lower. This provides fuel sooner at the low rpm. Move the clip higher if the bike is running rich.

Apr 23, 2011 | 1992 Suzuki VX 800

1 Answer

Can I install new cam chains on Suzuki vx800 without removing engine

yes you can, but cam chains never fail on this engine, the cam chain automatic tensioner does.

Aug 31, 2009 | 1990 Suzuki VX 800

1 Answer

I changed the fork seals but i dont know how much fork oil to put back in fork tubes bike didnt come with a owners manual im having trouble finding repair manual

fork oil type -fork oil#10, oil capacity each leg 388 ml for E-01,28 33 models and 392 ml for the other models standard oil level 142mm for E-01,03,28,33 138mm for the other models

Aug 22, 2009 | 1991 Suzuki VX 800

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

85239 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6528 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides