Question about KTM Motorcycles

Open Question

Hey, I’ve just brought a KTM Duke 125 and rid it home and turned it off and back on and my head lights won’t work or indicators or the brake light . Could you help me please.

Posted by Matthew Roberts on


5 Related Answers


  • 422 Answers

SOURCE: 2002 Jetta...Brake lights will not work

hi there, im guessing you already checked the fuse, and its probably good. i would check the relay

Posted on Aug 28, 2008


Roberta Smith

  • 5158 Answers

SOURCE: Indicator light will not turn on

check your fuses under the dash... one of them is blown
even tho it's not flashing on the dash board... can you hear the clicking of the turn signals ?

Posted on Feb 28, 2009


Jeff Barton

  • 520 Answers


Replace both sides with correct dual element bulbs which may be the culprit here

Posted on Sep 27, 2009


  • 55 Answers

SOURCE: back lights

You have an earth problem on your rear light, check the bulb holder and all connectors on the plug that connects it to the main loom

Posted on Oct 11, 2009

Brian Anderson

  • 399 Answers

SOURCE: braking lights and turn signals not working

Did you check the brake and signal light bulbs? If something happened that blew a fuse, chances are you probably lost some bulbs too. that should fix your problem

Posted on Oct 20, 2009

Testimonial: "thanks for your quick response!..i checked again and looks like signals are okay but both rear brake lights still not working except the top light"

Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Ktm 125 duke won't start when turn ignation on there is just a click

Sounds like you just have a defective battery, pull the battery and have it tested.

Aug 17, 2016 | KTM 2013 125 DUKE

1 Answer

KTM 125 Duke 2011 mil light blinking two long and three short.

You are SOL! Have to take it to the dealer. KTM has not given a list of the fault codes for that bike. That bike also has alot of problems with the computer and going into safe mode.

Apr 06, 2014 | 1998 KTM Duke

1 Answer

KTM Duke 125: dashboard shows "Low oil pressure" but the moto is just back from the garage, and he has certainly enough oil.

Since it was just worked on ... take it back and find out what the problem is. Could be a disconnected or faulty sensor. In any event, since you took it to be repaired, and paid for it, get it repaired. Don't run the bike until this is resolved. Low pressure is DEADLY to a engine.

Feb 07, 2013 | KTM Motorcycles

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top KTM Experts


Level 3 Expert

85239 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6571 Answers

Are you a KTM Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides