Question about Suzuki Motorcycles

1 Answer

I need to change the battery on my 2004 suzuki intruder 1500 It is located in front of the motor between the front forks How do you open the battery compartment to remove / replace

Posted by Marla Faughtenberry on

Ad

1 Answer

guyvstewart

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 115 Answers

Posted on Jan 29, 2019

Ad

5 Related Answers

Anonymous

  • 101 Answers

SOURCE: battery location for a 2004 suzuki intruder 800

Hi ...... Find where the battery is, under the seat or behind a side panel. Disconnect the black (negative lead usually with a 10mm spanner then disconect the red (positive) lead. The battery will be held in place with a 'rubber' strap or a bracket and depending on type of battery there may be a vent hose from the battery to the lower half of the bike, this just pulls off and remains in place until you replace the battery. Installation is reverse except you connect red (positive) first.
Let us know how you get on.

Posted on Jan 20, 2009

Ad

Anonymous

  • 1 Answer

SOURCE: battery removel for a 2004 suzuki 800 intruder

the battery is under the bike, bottom of box hinges down, just in front of rear wheel.
pain in the ***
some recomend parking bike wheels and kickstand on board for better access.

Posted on Mar 04, 2009

Fabrice Wolters

  • 331 Answers

SOURCE: battery removel for a 2004 suzuki 800 intruder

I know for the models till 2002 where the battery is located in front of the rear wheel.

Place the bike on her side stand
remove the negative battery lead at the left side, just below the transmission tube ( cone ) 10mm socket wrench
On the right side remove the security cap on the positive lead ( cross screwdriver ), then remove the positive lead.
The battery is hold in place with a 'floor plate'. remove both bolts of the floorplate ( on each side ) while holding the palte into place.
gently lower the plate and the battery.

I hope the 2004 model has the same assembly!

Posted on Apr 02, 2009

Anonymous

  • 83 Answers

SOURCE: How do you remove and install a new fork lock?

YOU WILL NEED TO REMOVE THE TRIPLE TREE FROM THE FRAME TO ACCESS THE LOCK. ONCE YOU GET THE STEERING SHAFT REMOVED FROM THE FRAME YOU WILL SEE HOW TO REMOVE IT.

Posted on Oct 20, 2009

Anonymous

  • 68 Answers

SOURCE: Suzuki intruder 1500 charging system

You need to buy a volt meter and set it on 10, or 20 v-. Start the bike and see what it says. A good charging system will show 13-14+ volts. If the meter says 11-12 volts or does not change, you have a bad stator, or rect/reg. Take to a shop to have it further tested. Chaz Moto DC

Posted on Jan 22, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Suzuki VL 1500 Intruder LC key broke off in the fork lock


I have the same bike. Mine didn't come with a fork lock key, so I've never locked mine. If this works for you, you can decide whether or not you want to go further about repairing/replacing the lock cylinder.

First of all, you'll probably have to rotate the handlebars slightly to take pressure off of the locking mechanism. Then take a pair of small needle-nose pliers and try rotate the lock cylinder, all the while slightly rotating the handlebars. If you can get it unlocked that way, you're golden.

The video on 7 tricks to remove a key makes a lot of sense to me, if you haven't looked at it, I recommend it. With patience and a "light hand" I think you'll get it out.

Sep 28, 2018 | 2000 Suzuki VL 1500 Intruder LC

1 Answer

2004 Suzuki VL 1500 Intruder will not start when hot


An electrical part is worn causing ovrheatn. Ignition parts need to b tests..coil. Plugcables ignition module or components on alternator. Get a clymer or haynesmanual

Mar 16, 2018 | 2004 Suzuki VL 1500 Intruder LC

1 Answer

How much oil in front forks?


The fork oil should come to just below the bottom of the threads of the bolt by the o ring. do not use regular motor oil as it doesn't have the correct viscosity that fork oil has. Make sure both forks have the same amount of oil to prevent an unbalanced feel to the front end

May 30, 2014 | 2003 Suzuki VL 1500 Intruder LC

1 Answer

I have a grinding noise coming from what sounds like the left rear side of my 2003 VL1500 but cant see anything that might cause it


  1. Performance
    • Suzuki has introduced slight changes to the Intruder from year to year, such as variations in accessories and styling. The bike's performance, however, has remained steadily the same. The 2004 model has a four-stroke, 1,462 cc engine with a hybrid air and liquid cooling system. The single overhead cam (SOHC) V-Twin motor generates 67 horsepower at 4,800 rpm. It has a 96 mm (3.78 inches) bore, a 101 mm (3.98 inches) stroke and has a compression ration of 8.5:1. The Intruder also has a five-speed transmission.
    Suspension and Brakes
    • An oil-damped, telescopic fork suspension with coil spring comprises the front suspension. A link-type, oil-damped five-way adjustable spring preload makes up the rear suspension. The front brake system uses a dual hydraulic disc, and rear uses a single hydraulic disc.

    Dimensions
    • The motorcycle has an overall length of 99.4 inches, a width of 38 inches, a height of 45.9 inches and a wheelbase of 66.9 inches. The seat sits 27.6 inches off the ground, the bike clears the ground by 5.7 inches and weighs 659 lbs.

Jan 14, 2013 | 2003 Suzuki VL 1500 Intruder LC

1 Answer

Where is the battery located on the 1500 intruder


Hi, the battery compartment on the Intruder is located below the seat, in front of the rear wheel.

Apr 09, 2011 | 2001 Suzuki VL 1500 Intruder LC

1 Answer

Location of oil filter for 1998 suzuki 1500 intruder


Look at the front of the motor behind the front wheel. You should find it there. When you install a new one, put oil in it first and let it soak into the filter, then install. Replace the drain plug crush washer too. Every time you change the oil. Chaz Moto DC

Jan 21, 2010 | 1998 Suzuki VS 1400 Intruder

2 Answers

Fuse box


The main fuse is under the panel on the right side behind the forks and the rest of the fuses are in the crank case under the cover...where you fill the oil.

Nov 10, 2008 | 2004 Suzuki VL 1500 Intruder LC

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6523 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...