Question about Keeway Motorcycles

1 Answer

Turn signal not working Keeway Dorado 250

250 v twin keeway dorado I have no blinker on LH side a wiring diagram would be a big help @

Posted by ron dormer on

Ad

1 Answer

Gregg Mahin

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Keeway Master
  • 63,021 Answers

Hi, Ron before testing any electrical component in the Turn Signal Light Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test because your battery may have 12.5 volts or more but little or zero amps causing the battery to be faulty and must be replaced, "AGM" batteries fall into this category more so than lead-acid types, also before diagnosing any turn signal/running light/parking light issue make sure the bulb is good and the light fuse has continuity with a test light. If you have replaced your OEM lights with one or all LED lights you are going to need a load equalizer.
If no turn signals are working the cause could be a faulty turn signal module/flasher or the connector going to it, look for corroded, loose, or broken pins/sockets. Contact spray cleaner is great for removing corrosion.
If your turn signal comes on but takes several seconds before it starts flashing you may have dirty contacts in the turn signal switch/button, the switch needs to be opened up and cleaned also the flasher may be starting to fail. It should be noted that cold weather will only exacerbate the situation especially when temperatures drop down below freezing and the location of the component, turn signal switches on the handlebar are at the mercy of the oncoming freezing 70 mph wind and makes it hard for the contacts to do their job covered in frozen grease/grime
If all four turn signals flash at the same time like hazard lights even though you only pressed one turn signal button then you have a LED light in the circuit and need a load equalizer that can be purchased from any motorcycle parts supplier.
If your speedometer does not function properly it will have to be fixed first because your turn signal module gets the data from the speedometer for normal turn signal function.
If your front turn signals don't work use a test light to check for power and ground at the bulb socket, then start backtracking the wiring through every wire connector to the turn signal switch/button and check for continuity, go all the way back to the fuse if necessary to find the cause of the malfunction.
If your rear turn signals don't work check your rear fender wiring harness connector first, look for, corroded, broken, loose pins/sockets, power, and a good ground, the harness connector is usually located under the seat on the front of the rear fender then keep tracing the wiring look for obvious harness damage caused by the rear tire.
If you still can't find the malfunction backtrack from the rear fender wiring harness connector.
If one side does not work you could have a faulty turn signal switch or module check for continuity.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.youtube.com/watch?v=Ob4JWFQ6aTc
https://www.google.com/search?biw=1440&bih=757&tbm=isch&sa=1&ei=wq-9XNjKJOK0gge40I7oDA&q=++wiring+diagram+keeway+dorado+250&oq=++wiring+diagram+keeway+dorado+250&gs_l=img.12...16160.41491..43782...0.0..0.76.275.4......0....1j2..gws-wiz-img.......0j0i8i30j0i30j0i7i30.JbQQrbsO2yE
http://proxy-mx2.domainwink.com/keeway_dorado_service_manual.pdf
Keewayparts com Genuine Keeway Parts Shipped Worldwide
https://bikez.com/motorcycles/keeway_dorado_250_2014.php

Posted on Apr 22, 2019

Ad

1 Related Answer

gregg201

Gregg Mahin

  • 63021 Answers

SOURCE: 2008 Keeway Cruiser 250 service manual

Hi, Delaney the vast majority of service, parts fiche, and owners manuals on the internet are "FREE" to download and all service manuals contain wiring diagrams in the back pages. The rest usually charge a modest fee around $10 to $15 and there is a handful of obscure, rare, obsolete, and very old models that are no longer or never were available, for these rare occasions I shall look on eBay and find the cheapest one available. Most of the manuals will cover your exact make, model, and year otherwise one will be provided that comes as close as possible to your bike and will have most of the same info that an exact manual would have. If there is no $ sign after the manual link it is free to download for viewing or printing. To download your manual please click on the blue links below. Good luck and have a wonderful day
KEEWAY CRUISER 250 MOTORBIKE WORKSHOP REPAIR MANUAL Download Manuals... $34
https://www.ajsutton.co.uk/spares/chooseModel.asp?make=keeway&uID=0
KEEWAY Cruiser 250 Owner Manual
https://www.ultimatespecs.com/motorcycles-specs/keeway/keeway-cruiser-250-2008
Keeway 250 Cruiser

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Posted on Oct 17, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Big Boy 250 Scrambler wiring diagram


Hi, Jaco for more information about your question and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Big Boy 250 Scrambler wiring diagram Google Search
Wiring motorcycle up from scratch with minimal wiring Japanese bike
SAMotorcycles TSR250
Jeff Bikes and Parts Big Boy
https://www.slideshare.net/YunPires/big-boyxtg250ownersmanual

Jul 25, 2018 | Big Motorcycles

1 Answer

2008 Keeway Cruiser 250 service manual


Hi, Delaney the vast majority of service, parts fiche, and owners manuals on the internet are "FREE" to download and all service manuals contain wiring diagrams in the back pages. The rest usually charge a modest fee around $10 to $15 and there is a handful of obscure, rare, obsolete, and very old models that are no longer or never were available, for these rare occasions I shall look on eBay and find the cheapest one available. Most of the manuals will cover your exact make, model, and year otherwise one will be provided that comes as close as possible to your bike and will have most of the same info that an exact manual would have. If there is no $ sign after the manual link it is free to download for viewing or printing. To download your manual please click on the blue links below. Good luck and have a wonderful day
KEEWAY CRUISER 250 MOTORBIKE WORKSHOP REPAIR MANUAL Download Manuals... $34
https://www.ajsutton.co.uk/spares/chooseModel.asp?make=keeway&uID=0
KEEWAY Cruiser 250 Owner Manual
https://www.ultimatespecs.com/motorcycles-specs/keeway/keeway-cruiser-250-2008
Keeway 250 Cruiser

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Oct 17, 2017 | 2008 Keeway Cruiser 250

1 Answer

How do I remove the seat of a Keeway 250cc to get to the battery


Hi, Delaney for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your KeeWAY, despair not, for a mere zero $34 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How to remove seat of keeway RKV 125
How to remove seat to access battery
KEEWAY CRUISER 250 MOTORBIKE WORKSHOP REPAIR MANUAL Download Manuals... $34
Keeway Cruiser 250 front mudguard
KEEWAY Cruiser 250 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Sep 19, 2017 | Keeway Motorcycles

1 Answer

Big Boy GPR 250 wiring diagram


Hi, Renier for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Big Boy, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Big Boy GPR 250 wiring diagram Google Search
Big Boy Gpr 200 Harness Blueprint Circuit and Wiring Diagram wiringdiagram...
Scooter Workshop Manuals
Jeff Bikes and Parts Big Boy
Big Boy Xtg 250 Owners Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Sep 14, 2017 | Motorcycles

1 Answer

Keeway dorado 250cc motorbike,i did change the fuse wire/modified using wire.now having problem with no power at all..cant start ..battery & fuse look working..any issue related or how to fix this?


Hi, Mustafa and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a "LOAD" test, your battery may show 12.5 volts but has little or zero amps and must be replaced.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
5. Bank angle sensor needs a reset or is faulty.
6. FOB battery low or dead.
7. Faulty ignition switch.
8. Faulty starter button.
9. Faulty kickstand or clutch pull in switch/sensor.
10. Security alarm needs a reset.
11. Starter relay, solenoid or starter circuit wiring faulty.
12. Starter armature or field coils have failed.
13. Main fuse or circuit breaker may be blown or faulty.
14. The electric starter is working but starter clutch has failed.
15. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Yamaha Vstar 250 won start need to diagnose and fix possible fuel battery...
cranks but wont start
http://www.benelli.keeway.my/image/post/manual/dorado.pdf
https://www.aliexpress.com/store/group/Stock-Parts-2V49FMM-XV250-Keeway-Cruiser-Dorado/436449_252868059.html

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Mar 25, 2017 | Keeway Motorcycles

1 Answer

Right blinker not working 1999 Buick park avenue


You'll need to find a wiring diagram an component location chart to check this out . Here is a diagnostic flow chart for trouble shooting this problem ! Do you know how to use a voltmeter ?
DEFINITION: This table diagnoses inoperative turn signals on one side. It assumes that the cornering lamps, hazard lamps, and turn signals on the other side all operate properly.

1

Did you perform the Exterior Lights System Check?
--
Go to Step 2 - yes
Go to Exterior Lights System Check - no

2

  1. Disconnect the turn signal flasher connector.
  2. Turn the ignition switch to the RUN position.
  3. Place the turn signal switch in the appropriate position.
  4. Connect a DMM from the appropriate turn signal flasher connector cavity to ground:
?€¢
LH: cavity C (ORN)


?€¢
RH: cavity B (BLK)

Is the voltage within the specified range?
10-15 V
Go to Step 3 yes
Go to Step 5 no

3

Connect a fused jumper between the appropriate turn signal flasher connector cavities:
?€¢
LH: cavity C (ORN) to cavity D (YEL)


?€¢
RH: cavity B (BLK) to cavity F (TAN)

Do the appropriate turn lamps light without flashing?
--
Go to Step 4 yes
Go to Step 6 no

4

Replace the turn signal flasher. Refer to Hazard and Turn Signal Flasher Replacement .
Is the repair complete?
--
Go to Exterior Lights System Check
--

5

Repair the open in the appropriate circuit:
?€¢
LH: CKT 57 (ORN) between S200 and the turn signal flasher


?€¢
RH: CKT 58 (BLK) between S201 and the turn signal flasher

Refer to Wiring Repairs in Wiring Systems.
Is the repair complete?
--
Go to Exterior Lights System Check
--

6

Repair the open in the appropriate circuit between the turn signal flasher and the IP fuse block:
?€¢
LH: CKT 685 (YEL)


?€¢
RH: CKT 686 (TAN)

Refer to Wiring Repairs in Wiring Systems.
Is the repair complete?
--
Go to Exterior Lights System Check

May 09, 2015 | 1999 Buick Park Avenue Ultra

1 Answer

My new Keeway 250 Dorado needs the clutch pulled twice to get from neutral into first often but not every time. If you click into first and let out the clutch it doesn't move. If you pulled the...


find a real mechanic that can reason out the failure and fix the fault
indicates a problem in the adjustment or a cable problem or if hydraulic , air in the system

Feb 28, 2018 | Keeway Motorcycles

2 Answers

Hello, I need a wiring diagram for a big twin evo 86' . It is the first evo engine that was maked.I need it for my sportster . grtz, Andy Belgium


This page has a ton of wiring diagrams: http://www.smokeriders.com/diagrams/index.php?list=Harley_Davidson/Twins. The sportster did not come with a Big Twin 86" motor it came with the Sportster Ironhead & Evo motors. The sizes where; Ironhead 900cc, 1000cc & Evo 883cc & 1200cc. Still I would try the link I gave you it should help.

I’m happy to help further over the phone at https://www.6ya.com/expert/al_e83b1941f9c0f302

Feb 27, 2011 | Harley Davidson XL 883 Sportster...

1 Answer

2000 FXST HARLEY engine light blinks on and off,speedo drops off while running, engine does not stop running,also notice that blinker stays on


Hi Nofkbed, always check fuses and bulbs first, you could have a faulty turn signal module or a bad turn signal button/switch, remove it from the switch housing and check for continuity, check your wiring and connections from the turn signal switch to the turn signal module with a testlite. Make sure all wires are not worn or pinched and connector pins are not corroded, broken, or loose. For a free wiring diagram please visit the website below: Harley Davidson Wiring Diagrams and Schematics Big Twin Carb EFI DTC Intructions codes Harley Davidson Forums Harley...

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jun 30, 2010 | 2000 Harley Davidson FXST Softail Standard

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Keeway Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

richard libby

Level 2 Expert

209 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6375 Answers

Are you a Keeway Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...