Question about Motorcycles

1 Answer

Bashan 250RR starter will not engage

Hi hope someone can help me out I have trouble with my bike that won't start Bashan 250RR starter swings but not turning the motor to start the bike it just makes the starter turn funny noise but like its missing the gear that turns motor @

Posted by Louis on

Ad

1 Answer

peter pan

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Jeff it will not spark if the starter clutch it not turning the engine over the little notch on the flywheel has to pass the pickup and would not putting a screwdriver accross the starter relay test if there a current problem its a quad not a car btw.

Posted on Nov 18, 2021

Ad

5 Related Answers

jpolicky

Jeff Policky

  • 40 Answers

SOURCE: my bike turns over but won't start

19 Black/red ECU lead (broken or disconnected) A break or disconnection of the black/red lead of the ECU is detected.

Posted on May 19, 2009

Ad

Anonymous

  • 67 Answers

SOURCE: golf mk4 gti 2.0, starting up problems, will not fire?

this could be an ignition module problem.next time it happens you need to check if it has spark at the spark plug let me know cheers!

Posted on Apr 12, 2010

Anonymous

  • 193 Answers

SOURCE: starting problem on rs125

Based on your description, its sounds as though you have a starter or starter selnoid problem. The starter selnoid is not engaging the engine at first and then when it does, is nort passing enough current through to the starter motor to get the job done.
Bill

Posted on Nov 19, 2008

Anonymous

  • 6 Answers

SOURCE: Starter motor spinning but not turning over engine

take the starter off and look in at the flywheel to see if the teeth are in good shape if not the fly wheel needs replaced...if they are in good shape then the solinoid may be bad on the starter...take it to a electric motor shop they will likely test it for free

Posted on May 07, 2009

Joe H.

  • 330 Answers

SOURCE: starter clicking noise, bike won't start

start relay should be checked, if cables are loose or corroded they do not deliver enough power.if jumping the start relay will engage the starter replace the relay.

Posted on Apr 30, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I need to locate the crank pickup sensor on a bashan 250rr motorcycle were can i find this

I don't know but taking a wild guess it could be integrated into the alternator...
0helpful
1answer

1997 Big Dog Vintage Classic at Sturgis, SD this weekend, just quit ! He (Art/husband) is out there looking for the problem..12 volt from battery to turn on switch Nothing after that In linefuse loca

Deborah, I know very little of the Big Dog Bikes Electrics and not a lot of info out there for the Big Dog, just wanting to help hopefully. Below I will post links different from Gregg's, hoping that they will also help in your bikes dilemma. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Where are the fuses
2003 big dog chopper wiring diagram Google Search
Big Dog Chopper Wiring Diagram
2003 big dog chopper wiring diagram Google Search
Aug 15, 2016 • Motorcycles
0helpful
1answer

My bashan 250rr starts perfectly, but the emergency switch off, hooter and sometimes the indicators does nt work, and if I switch the key off the engine still runs. what is wrong? starter?

Usually, if the ignition is turned off and the engine still runs, in the case of a petrol engine the engine is "coked" has a carbon build-up which continues to ignite the petrol/air mixture when compressed. If a diesel, the pressure relief valve is not operating at switch-off.
0helpful
1answer

My bashan 250RR doesnt want to start, when I press

Your starter relay (solenoid) has probably failed. They are cheap and easy to replace :)
Oct 17, 2014 • Motorcycles
0helpful
1answer

Wiring diagram bashan 200cc s7 quad bike

check there is spark and spray quick start ito back of carb when trying to start
Jan 12, 2014 • ATVs
0helpful
1answer

Bike won't start, headlights and gauges light, hear a click coming from under the bearpaw, battery is new today from dealer

If you're hearing a clicking from the engine casing after changing the battery and the bike still won't start, chances are there may be a problem with your starter motor.

Either it's not contacting well enough to the battery (Faulty Wiring or Loose Connection), may be having trouble engaging/dis-engaging the starter gear, or it's just cactus and needs repair/replacing.

If you haven't tried push starting the bike, I'd suggest trying that first. Sometimes that can dis-lodge the starter gear if it's stuck, but it might require maintenance to ensure it doesn't happen again.

If you're un-aware of how to perform a rolling start, put the bike on a downward slope, or get a friend who can help push. Put the bike in first gear with the clutch in, and the ignition 'on' and roll the bike forward to a bit more than a brisk walking pace. Lift your weight from the seat and drop it down again quickly. As you drop down, release the clutch to engage first gear and hopefully the bike should spring into life. (Beware not to hold the throttle open, or stop moving too quickly, as this can cause an the bike to spring forwards or dropping of the bike as it stops suddenly)

If this fails, you may need to have the Started Motor removed to be looked at, as it may need replacing or repair by a professional.

Hope that helps!
Not finding what you are looking for?
Motorcycles Logo

Related Topics:

338 views

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7005 Answers

mark woodring
mark woodring

Level 3 Expert

498 Answers

Brad Brown

Level 3 Expert

18852 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...