Question about Power Motorcycles
BCM I believe on that should be behind glove box area. You'll have to remove knee guard from door to radio, to see it up under near glove box area, screws & brackets holding up there. As far as disabling it, a little google work or go on a forum, you may get info, but sounds like circuit board has to be modified with jumper wire or something. Have you tried unlocking passenger door with key(s) to see if that will disable security system?
Posted on May 20, 2009
I have a slightly older springer, but they are probably the same. The shop manual says in reference to the acorn nuts on top of the spring restraints, "Tighten acorn nuts to 30-35 ft-lbs torque."
Posted on Aug 29, 2009
SOURCE: High Idle On Start-up.
Most fuel injected motorcycles do start up in a "fast idle" mode. Although I don't know much about fuel injection on Harleys (H-D will not tell you much about it unles you are one of their technicians), I don't think the system is equipped with an engine temp sensor. Since the crank case sensor get it's pulses from pockets cut into the outer edge of the left side flywheel half, the sensor will have oil on it.
Posted on Sep 24, 2009
Tips for a great answer:
Apr 09, 2014 | 2007 Harley Davidson FXSTD Softail Deuce
Apr 08, 2014 | 2003 Harley Davidson FXSTD Softail Deuce
Oct 14, 2013 | 2004 Harley Davidson FLSTC - FLSTCI...
Mar 30, 2013 | 2003 Harley Davidson FXSTDI Softail Deuce
Nov 21, 2012 | 2003 Harley Davidson FXSTDI Softail Deuce
Jun 30, 2012 | Harley Davidson Motorcycles
Jun 20, 2012 | 2003 Harley Davidson FXSTDI Softail Deuce
May 13, 2011 | 2003 Harley Davidson FXSTD Softail Deuce
Apr 01, 2010 | 2003 Harley Davidson XL 1200 C Sportster...
Mar 14, 2009 | Harley Davidson FXD Dyna Super Glide...
390 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: