Question about 2004 Suzuki GSF 600 S Bandit
Can’t figure out where all the vacuum lines go on a 2004 Suzuki bandit 600 @
SOURCE: suzuki gsf 1200 s bandit
Christmas comes early. Go to the site below and you can download a free PDF service manual. Yours is the 1st one in the "Suzuki GSF" section of the list. 4 or 5 below that is a PDF parts diagram with part numbers.
http://www.carlsalter.com/motorcycle-manuals.asp Most manuals are in English but some are not. There is no way to be sure without doing the download. You can always delete it if in a foreign language.
Top rating due for this answer! Thanks Asel :)
Posted on May 08, 2009
set the bike on the centre stand,loosen the rear axle nut,on either side of the swingarm at the rear there will be a small adjuster nut(normally with a lock nut on it)undo the locknut,then turn each ajuster 1/4 turn at a time untill the chain has about 1 1/2 inches freeplay up and down,make sure when you do this that the axle alignment marks are exactly the same on both sides of the swingarm,once you have the chain adjusted to the right tension,tighten the rear axle bolt and replace the splitpin(if fitted),then tighten the locknuts on the chain adjusters,thats it,hope this helps
Posted on Jul 10, 2009
Tips for a great answer:
Apr 28, 2014 | 2002 Suzuki GSF 600 N Bandit
Sep 27, 2013 | 2005 Suzuki GSF 1200 Bandit S
Aug 15, 2012 | 1997 Suzuki GSF 600 S Bandit
Apr 29, 2010 | 1997 Suzuki GSF 600 S Bandit
Feb 27, 2010 | 2004 Suzuki GSF 600 S Bandit
Dec 08, 2009 | 2004 Suzuki GSF 600 S Bandit
Nov 22, 2017 | 2004 Suzuki GSF 600 S Bandit
221 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: