Question about Suzuki Motorcycles

Open Question

On my Suzuki C50, All of my turn signals are flashing anytime the key is turned on.

Posted by Jeffrey A Jamison on


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Suzuki owners manual pdf

All you do is turn the key to the open position and then remove the cap as you normally would. Some do have a spring that make you hold the key in the open position as you turn it.

Sep 01, 2014 | 2005 Suzuki Boulevard C50

1 Answer

Why doesnt my rear running lights work on my 2008 suzuki boulevard c50. turn signals and brake work, but after jump starting it the the running doesn't.

i got the same problem i have been over the whole bike cant find the problem i was hoping someone had a dealer find the problem on there bike. i m still lookin i thought key switch but i have one tail light workin all flashers work and sometimes the fuel pump wont start its a very crazy problem.

Aug 26, 2013 | 2008 Suzuki Boulevard C50

1 Answer

2008 suzuki c50 have no dash or headlights and won't start

Usually all 3 of these things mentioned are activated when the key is turned to on. I don't know about any fuses or links on that bike but check your manual or online to locate them. The problem could be in the area of the start switch also.

Jun 14, 2012 | 2008 Suzuki Boulevard C50

1 Answer

What is a cancel switch? My suzuki samurai's one was taken out.

normally thats the kill switch,, they may have removed it to install a alarm at one point in time and just use the key for the stop , unless your asking about the signal cancel switch, which on some older bikes would turn the signal off after a turn,,

Aug 26, 2011 | 2005 Suzuki Boulevard C50

2 Answers

Suzuki C50, 2006. Right turn signal won't cancel even though the left signal works. Have opened up the switch to insure correct function. Traced wires to assure no scraped for grounding problems. ...

I do not think these are tied to a relay of any sort, so I would suspect that the switch has failed mechanically; when you press the cancel button, the contacts are remaining closed. I am assuming that it is the same as my '05, and not self-cancelling.

Jul 16, 2010 | 2005 Suzuki Boulevard C50

1 Answer

How do I remove the turn signal assmeblies from my 2007 Suzuki c50 Boulevard

the light is a full assembly. the soft plate in front removes with a single screw from the bottom center. it makes access to the nut holding on to the light assembly. the headlight must be removed to get to the end wire connections.

Jun 26, 2010 | 2005 Suzuki Boulevard C50

1 Answer

How do I remove the front turn signal assembly of a 2006 Suzuki C50 Boulevard?

on the 2005 intruder there is a small screw under the plastic wing shaped chrome thing under the headlight. this wing thing can then be pulled to the front and u have access to the nuts and bolts that hold the indicators to the rest of the bike.

Sep 07, 2009 | 2005 Suzuki Boulevard C50

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

85239 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6521 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides