Question about 2013 Yamaha Majesty 400

1 Answer

2013 Yamaha Majesty 400 speedometer not working

I have a Yamaha majesty yp400 2013 Speedo just stopped working but rev counter works any ideas, please @

Posted by ian sheldon on

Ad

1 Answer

Gregg Mahin

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Yamaha Master
  • 61,588 Answers

Hi, Ian and the usual suspects are:
1. Contaminated or faulty speed sensor.
2. Faulty turn signal module.
3. Corroded, broken or loose connector pins/sockets in the wire harness between the speedometer and the ECM or TSSM and the sensor.
4. The speedometer unit has failed.
5. Speedometer instrument fuse has blown.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
www MajestyUSA com
How to FIX For Scooter Speedometer and odometer Stopped Not Working
2008 2012 Yamaha Majesty 400 YP400 Service Manual Repair Manuals AND... $15
https://www.partsfish.com/page/oem-parts-for-yamaha
YAMAHA MAJESTY 400 Owner Manual

Posted on Jul 18, 2018

Ad

5 Related Answers

alicantecoli

Colin Stickland

  • 22485 Answers

SOURCE: speedo and milage counter

new unit complete

Posted on Dec 20, 2008

Ad

lapum0nz

  • 18 Answers

SOURCE: my rev counter, speedo, fuel gauge and temp gauge

try to check yor meter conection at the rear of your meter.there is a loose connection due to vibration

Posted on May 11, 2009

Anonymous

  • 1 Answer

SOURCE: speedo and rev counter not working on alpha romeo 156

check for your VSS. VSS may be at fault.

Posted on May 11, 2009

tknowles93_t

  • 12 Answers

SOURCE: yamaha xt 125 07 no speedo or rev counter any

This is a very common problem for the yamaha xt 125. I suggest that you either buy a new Heads up display or you take it down to yamaha and get them to fit another one, which i think might be free of charge due to it being a problem with the bikes.

Posted on Dec 22, 2010

horac58

  • 1 Answer

SOURCE: 2000 yamaha roadstar 1600. electronic speedo and

Hi tcjones65 !

Did you find any solution? I have the same problem on my XV1600. I've changed the speedometer assembly, but it still the same, fuel gauge and speedometer doesn't work...

Posted on Jun 15, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Yamah bt1100 speedo


Hi, Gilbert you may have a faulty sensor for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://www.r1-forum.com/forums/102-00-01-r1-mechanical-help/330687-speedo-not-reading-correctly.html
Repair Yamaha Star Speedometer Odometer Not Working
Yamaha BT1100 2002 Service Manual
OEM parts for Yamaha
YAMAHA BT1100 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Sep 02, 2012 | 2002 Yamaha BT 1100 Bulldog

1 Answer

Rieju rs3 speedo & rev counter


Hi, Jeremy for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Speedo and Tach not working
http://www.rieju.es/uploads/Descargas/RS3%20125/web_ENG_MANUAL%20PROPIETARI%20_RS3%20125.pdf
http://www.rieju.es/uploads/Descargas/RS3%20125%20NKD/ENG%20-%20MANUAL%20PROPIETARI%20-%20RS3%20NAKED%20125%20-%20web.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jul 27, 2012 | Rieju Wild Card S Motorcycles

1 Answer

2004 Ford Fiesta speedo (and rev counter) works intermittently.


vehicle speed sensor at transmission or bad wires/loose connector

Aug 31, 2017 | Ford Fiesta Cars & Trucks

3 Answers

Speedometer on 1997 Yamaha Majesty not working,


Ken Budd's answer is incorrect: There is only a potential engine problem when the oil light comes on permanently.

The speedo/mileometer on thge Majesty normally sends pulses to a counter that switches on the oil-change warning light at 3,000 km. If the speedo/mileometer ceases to function the oil-change warning light blinks steadily simply to let you know the pulses aren't getting sent to the counter.
The most likely problem is a broken speedo cable; a new one costs £5.72 from AJSutton and you can easily fit it yourself: Take off the windscreen then reach through the gap above the headlamp to unscrew the outer cable beneath the speedo.

I've got the same problem as you right at the moment with my 1996 Majesty but in my case its the gear unit on the front axle (to which the speedo cable connects) that has stopped working: I'm currently on the look out for a new gear unit. Does anybody have one ?

May 23, 2010 | Yamaha YZ 250 Motorcycles

1 Answer

My neutral light and speedo will not work on my 2000 r1 there is power to the clock but it just reads zero all the time also the rev counter keeps flickering zero to 3000 and it wont start with the stand...


Hi, Tom your ECM has generated a fault code for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r1-forum.com/forums/101-98-99-r1-mechanical-help/211207-98-r1-rev-counter-error-revs-go-up-3000rpm.html
Yamaha Tach bouncing the problem and the the fix
2000 2001 Yamaha YZF R1 Service Manual R1 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Oct 03, 2009 | 2000 Yamaha YZF-R1

1 Answer

Fireblade 929 on a y plate .. speedo and rev counter just stopped working any idea


Sounds like a wiring/connector problem. Could be the common earth connection that has corroded. Check all wires that go to BOTH the rev counter and the speedo, since both went out at the same time.

Jun 06, 2009 | 2001 Honda CBR 929 RR Fireblade

1 Answer

Yamaha Majesty 400 ABS and V-belt indicator lights flash on


Hi, Forouhcr moisture, condensation, rain, or bike washing can make the bike run sluggish, not able to rev, and misfire. Older bikes, engine configuration, and exposed electrical components are at the front of the line for acting up. During the diagnostic procedure spray Electrical Contact Cleaner on corroded wire connectors/pins/sockets etc. and apply a liberal amount of "DIELECTRIC" grease to the mating harness/wire connectors. WD40 works great for eliminating suspect areas in your quest to find the real offending gremlin.
For additional insurance you can spray a High Temp Clear Coat on the most vulnerable areas it will work like Scotch Guard does on fabric. Fabricate a rubber or plastic splash guard to deflect water coming off the front wheel getting to the front cylinder spark plugs. The design should be adequate for its purpose with the least amount of air flow restriction to cool the cylinders. The usual suspects are:
1. Air filter soaked with water.
2. Water in the fuel system gas tank and carburetors.
3. Wet ignition coil packs.
4. Spark plug boots wore out or loose allowing water to enter.
5. Spark plug cables old and cracked check for spark leakage in the dark.
6. Spark plug wells filled up and drain holes clogged.
7. Water in a wire harness that has exposed open ends and have a sharp bend or kin allowing the liquid to form its own pool of potential threats to chaffed wiring.
8. Sensitive fuel tuners and downloaded ECM remaps may get confused with the abnormal cylinder temperature difference in a V-4 engine configuration.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
www MajestyUSA com
How to Reset belt light on Yamaha Majesty 400
Yamaha YP400T YP400V YP400W Service Manual
OEM parts for Yamaha
Yamaha MAJESTY 400 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


May 01, 2009 | 2007 Yamaha Majesty 400 ABS

1 Answer

My rev counter, speedo, fuel gauge and temp gauge


try to check yor meter conection at the rear of your meter.there is a loose connection due to vibration

Mar 30, 2009 | 2006 Gilera Nexus 250

Not finding what you are looking for?
2013 Yamaha Majesty 400 Logo

Related Topics:

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1176 Answers

Paul Ellermets

Level 1 Expert

6 Answers

Neil Lancaster
Neil Lancaster

Level 1 Expert

14 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...