2013 Suzuki Boulevard S40 how to relocate rear turn signals for saddlebags

SOURCE: battery

i am in the process right now, and am having difficulty. the battery that was purchased does not fit properly; vent tube side would face belt side if terminals are aligned. to access removal of old battery, though, i took of the side panel, removed/unscrewed where owner's manual/tools sit. then, just disconneted bolts from terminals and slid it out.

Posted on Nov 10, 2008

SOURCE: oil capacity

With filter 2.1 Qts

Posted on Nov 10, 2008

SOURCE: taking off rear turn signal to install saddlebag bracket

look on the inside of rear fender, right in-line with the turn signal. There is a nut that you will take off and it lets turn signal come off.

Posted on Jun 12, 2009

SOURCE: I would like to install saddlebags on my 2005

Hi,
We ride the same bike as you and had the saddle bikes fitted when we first bought the bike new. Yes, you will definately need a fitting kit, you do with all the bags, however be very careful about what bags you buy. We have the original 'money bag' shaped bags which were particularly designed for the bike and to match the saddle. The were very expensive and were the biggest waste of money ever! They are so impractical if you have a set of wet gear in each side they are full to bursting and the small opening at the top makes them very awkward. Just last year Harley bought out a new, bigger, set, I don't know what the top opening is like but it has to be better than the ones we have, we are even considering swapping to the new ones as we tour quite a lot.
Hope this helps.

Posted on Jun 23, 2009

SOURCE: saddlebags

You could google for fitting instructions..

Posted on Aug 23, 2009