Question about 2013 Kymco Downtown 200i
Im riding kymco 200i why when moving off my bike jerking n slowing down is it the battery, spark plug or my clutch pad is getting wear n tear? Anyone can help me answer this please @
Hi, Adams and the usual suspects are:
1. Dirty or clogged air filter.
2. Faulty spark plug.
3. Bad Gas.
4. Improper oil level.
5. Improper chain adjustment and lubrication.
6. Low tire pressure.
7. Dirty or contaminated carburetor needs cleaning and tuning.
8. Clogged or faulty fuel pump or injectors.
9. Improper valve adjustment.
10. Slipping clutch.
11. Improper timing.
12. Low compression.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Help moped starts but has no take off power
scooter losing power under acceleration
KYMCO Downtown 200i Service Manual
KYMCO Downtown 200i Owner Manual
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e
Posted on May 11, 2018
ok there is two solutions to this prob to consider first try the clutch cable adjustment. If that does nothing try The clutch springs inside the case. If there are wear marks on the clutch basket then you need to completely replace the clutch all together. let me know how you make out
Posted on Feb 04, 2009
Remove the panel between your legs , with a screwdriver, Use the adapter found under the seat, you can locate the spark plug there, not to easy to see try with a torch first to locate it
Posted on Jun 10, 2009
SOURCE: Clutch slipping
bad news. a goodly amount of 2004's came out of the factory with faulty clutches.. there's been several efforts by rebel owners to get a recall on them, but no luck so far. hope that's not what it is, but bear it in mind if you find your top speed dropping.
Posted on Jul 21, 2009
Check the drive belt. It probably has chunks missing or at least has flat spots (narrow spots) that cause the belt to jump every time it goes around a pulley. That will set up a heck of a vibration. Also check the pulleys for free movement. The drive belt is above the blade drive belt....
Posted on Jul 29, 2009
MAN ITS A MINOR PROB JST CHANGE THE SPEED OF COMBUSTION IT SHOULD BE 1 MIN AT UR RPM METER IN THE BIKE AND ITS PIN IS NEAR THE CARBURATER JST CHANGE IT AND ENJOY UR RIDE
Posted on Aug 25, 2009
Tips for a great answer:
Sep 08, 2017 | 2010 Kymco Downtown
Jun 02, 2017 | Kymco Motorcycles
Feb 26, 2017 | 2013 Kymco Downtown 300i
Jan 01, 2017 | Kymco Motorcycles
Aug 01, 2015 | 2013 Kymco Downtown 200i
Jun 13, 2015 | 2013 Kymco Downtown 300i
Dec 03, 2014 | 2010 Kymco Downtown
Oct 10, 2014 | 2011 Kymco Yager GT 200i
Mar 14, 2009 | Kymco Zing 125 Motorcycles
157 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: